oh,it detects as c-media headphone set.btw, the PC is not with me now, my fren borrowed it to do some "learning".

thanks for the driver but i can't install. when i wanna install , got a error, it said "You appear to be running an X server, please exit X before installing................"
help please

i was trying to kill a process as my pc hang. i'm so used to Ctrl+Alt+Del in windows but now applying in ubuntu.
the system still hang so i've no choice but to unplug the power supply.
once i restart my system again, it can't even log into OS
there's loads funny codes and the last line is written
<0> Kernel panic-not syncing:Fatal exception in interrupt
and it juz hang there....
anyone knows what's happening... HELP !!!

You need to install it runlevel 3.
Means, just console, without running X.

Hmm. Sounds like IRQ's conflict.
How about disable some devices in your system and try booting again?

i need to edit the etc/inittab to boot in runlevel3 , right? but how to edit it? where is the file? sorry, never learn linux or use linux before, totally noob.

To switch to runlevel 3, you can just start a terminal screen and type telinit 3

To edit the /etc/inittab, you can use vi.
But the change in the file is permanent once you change it, means it will always boot in runlevel 3, unless you change back the value in the file to boot in runlevel 5.
Cheers!

*sigh* even i changed runlevel3(check with command "runlevel") but still can't install, still got "You appear to be running an X server, please exit X before installing................" feel like to give up Linux...

This post has been edited by ITGuys: Feb 7 2007, 02:06 AM

The post you entered in was too short. You must have at least 10 character(s) in your post before it will get posted.

This post has been edited by belikethat: Aug 3 2007, 01:46 AM

could be you already hav pppoe running on your system. By default ubuntu use auto dhcp..u need to disable it 1st.. set to static.. or

you dont hav working eth0 (NIC). do >lspci to display your NIC & >lsmod to see if your card use proper module driver..

Better use pico or nano if you never use an editor in CLI before.. definitely easier than vi

i did some changes in the BIOS setup... it's running again i guess... thx ya

The post you entered in was too short. You must have at least 10 character(s) in your post before it will get posted.

This post has been edited by belikethat: Aug 3 2007, 01:47 AM

Uh huh. The gateway must be in the same subnet as the local eth0 address.

What are you trying to do?

trying to connect to the internet with ubuntu
give i admit i don`t know anything about linux
can tell me wat to do now


**refer to post 308

So your modem is running in bridged mode?

dude your streamyx using router / modem mode? if router mode, u can connect to d net straightly...

my problem is, I can play all kinds of video and mp3 files using mplayer/ VLC/ real player.... BUT without any sounds in ubuntu. but the system sound can be hear very clearly such as the sound when login and logout. what should i do to enable sound in those player?
anybody knows what's wrong with it? did i miss out any codecs or etc?

This post has been edited by babymilo83: Feb 9 2007, 05:48 PM

i have no idea
Direct connection ADSL modem( DSL 600E Aztech)

Did you install mpg321?

---

Added on February 9, 2007, 2:50 pmHow did you connect to the internet previously?
What IP address did you get previously in your LAN properties when connecting to the net?

This post has been edited by kons: Feb 9 2007, 02:50 PM

Pardon, I have installed ubuntu 6.10 and managed to configure my usb Aztech 208u modem until the dsl light lighted up. After that, I am clueless on how to connect to streamyx.

When I tried sudo modprobe pppoatm and sudo pppd call ueagle-atm, the data light blinks a bit but in ifconfig, the ppp0 isnt displayed. Anyone have any idea/suggestion?

Oh ya, I need to know the VP&VC and what type of connection do streamyx use (pppoe,pppoa?)

EDIT: Problem SOLVED

This post has been edited by slepth: Feb 11 2007, 07:40 PM