i do notice some mechanic seal up the hole... not sure if this builds up the oil pressure inside...

That's my concern also, that's why consider sealing it... Need to ask around some workshop first....
Main reason is, the mushroom head already total blocked after using it for 7 years.
But the return to air filter can be sealed.

originally its connected to the airbox which is not sealed up... so, its better to replace it with a breather lo...

http://www.mudah.my/Proton+Wira+1+8+Manual...+NA-6006114.htm i am thinking of this. hehe....any advise sifu

[

This post has been edited by predator24: Feb 25 2011, 11:59 AM

Thanks for the information.

will go brother see how much does it cost.

Go Brothers to get performance part? lol..
better go performance shop

Mushroom head are not considered performance part........ Even can DIY your self on this by using the old Saga filter... Just like the famous OCT....

any picture ?

how to do that ?

From the above photo, the black "head" is beside the engine oil cover....

Guys, just took back my car from servicing and checking, the engine orange light lights up randomly and accompanied by jerking motions, like the car about to shut down itself, googled and found the problem was due to the throttle body, the workshop confirms it and ask for 600+ to change ( holy shit) am just a student and of course I can't afford that amount, so, any alternatives? So far light randomly lights up, and seldomly, and never died on me yet, *touch wood* so i think my throttle body is not that spoilt yet, am I right? I found a few pages back, some of u guys recommended throttlebody cleaning and changing wires, any idea on where to get it done?

Thanks

TL;DR need some cheaper alternatives than changing whole throttle body for wira 1.5 auto

This post has been edited by Sususegar: Feb 26 2011, 04:13 PM

TB can clean one, bro..... Clean cloth and a philips screw driver is all you need....
2003 model?

Yes should be, how did u know? areuawizard.jpg Is that such a common problem? lol

How do u clean it? Any instructions? Thanks

It is a common problem for Wira 2003, haha... Because I have 1.....
Hope you know where's that fellow is.... Just remove the air filter hose, then open up the valve and clean the internal with the clean cloth. You will see a lot of black carbon.... Once done it should solve your problem. if still cannot, a bottle of 3M fuel injection cleaner or a bottle of rm3 alcohol will do the job...
Sometimes is due to your injection heads dirty also.

changed my oldies with the sachs abs...cant wait to fully test drive it after done the alignment...

thanks for the information to all the pro.

i just change my car to open port and i dint block the 2 hold but put a fully cottan cloft to cover it and rape it properly.

i am still looking for the breather part at acc shop..

the car is 100% fell lighter after put in the air filter

u RAPED it??...

Where to get the cheapest lightened crank pulley with installation in KL?

what brand u looking for??

cheeann...those tayar that ppl change edi..den duwan edi wan..sell to me 4 piece, or at leasst 2 piece at dirt cheap price...for satria 4g92...195/50/15 i think...pm me

why not? got HOLE ma

Jasma Lightened Crank Pully
Cheapest..RM180 with sharp colour(purple)