Outline ·
[ Standard ] ·
Linear+
LYN Proton Wira Club (LYN-PWC) V-XXV, Come in & let's discuss about Wira
|
samwongjyhhorng
|
 Feb 22 2011, 11:49 PM
|
New Member
|
QUOTE(shinjite @ Feb 22 2011, 11:43 PM) 15 years? My Wira 1.6 is the first batch dated back in 1993 For me would be the AF graph and the curves. The figures are just for reference It is modded plus I already stated it was an auto Stock I would assume 80WHP? i thought less than 80whp..wat u modified done?can share?Is different of horsepower of wira 1.6 which manufacture 1993 and 1997?as i know,1997 ady got catalyst,rite?it will affect horsepower,isn't it? |
|
|
|
|
|
shinjite
|
Feb 22 2011, 11:58 PM
|
|
|
I assume 80WHP is already a very low figure plus the condition of my engine was quite healthy being 15 years old.
That time was exhaust,K&N drop in air filter, 60mm TB, PNP head, LCP, Denso iridium plugs, 10mm cables and fast road spec cams. ECU still stock standard without rechipping or piggyback.
With the same mods when I converted to manual, I released an additional 15WHP and >30Nm of torque. Anyway, HP gains varies from engine to engine. Some of you with the same mods might get lower or higher than what I got.
|
|
|
|
|
|
the_catacombs
|
Feb 23 2011, 01:55 AM
|
|
|
QUOTE(shinjite @ Feb 22 2011, 11:43 PM) For me would be the AF graph and the curves. The figures are just for reference +1 figures are just figures... its different at each dyno and fluctuates according to engine health... |
|
|
|
|
|
DaBestOne
|
Feb 23 2011, 04:32 PM
|
|
|
QUOTE(shinjite @ Feb 22 2011, 07:32 PM) Depends on individual, to me it is pointless if bone stock (for my car) Rather save the money for makan XD  |
|
|
|
|
|
chiewwl
|
Feb 23 2011, 05:56 PM
|
|
|
figures are just some numbers..
most important is to maintain ur healthy engine
|
|
|
|
|
|
SUSkyheng
|
Feb 23 2011, 07:38 PM
|
|
|
And those numbers don't reflect to actual driving....
|
|
|
|
|
|
monster2020
|
Feb 23 2011, 08:43 PM
|
|
|
HI Guys My wira engine is 4g13 year 97 cabuarator type. I just received my open port Intake Kit but i have some problem because the intake kit does not have any extra pipe hole for the 2 pipe. can anybody help me out on this. this is the 2 pipe picture. thanks in advance. This post has been edited by monster2020: Feb 23 2011, 08:43 PM Attached thumbnail(s)
|
|
|
|
|
|
maxgenesis
|
Feb 23 2011, 11:49 PM
|
|
|
QUOTE(DaBestOne @ Feb 23 2011, 05:32 PM) mr sean, can u call me if possible. i would like to make an appointment + new inquiry ..... |
|
|
|
|
|
the_catacombs
|
Feb 24 2011, 02:27 AM
|
|
|
QUOTE(monster2020 @ Feb 23 2011, 08:43 PM) HI Guys My wira engine is 4g13 year 97 cabuarator type. I just received my open port Intake Kit but i have some problem because the intake kit does not have any extra pipe hole for the 2 pipe. can anybody help me out on this. this is the 2 pipe picture. thanks in advance. the larger hose, remove it and plug in an air breather... the smaller vacuum hose, remove it and sumbat with a screw.... |
|
|
|
|
|
lixc
|
Feb 24 2011, 07:34 AM
|
New Member
|
QUOTE(shinjite @ Feb 22 2011, 11:58 PM) I assume 80WHP is already a very low figure plus the condition of my engine was quite healthy being 15 years old. That time was exhaust,K&N drop in air filter, 60mm TB, PNP head, LCP, Denso iridium plugs, 10mm cables and fast road spec cams. ECU still stock standard without rechipping or piggyback. With the same mods when I converted to manual, I released an additional 15WHP and >30Nm of torque. Anyway, HP gains varies from engine to engine. Some of you with the same mods might get lower or higher than what I got. thanks for sharing  |
|
|
|
|
|
monster2020
|
Feb 24 2011, 09:15 AM
|
|
|
QUOTE(the_catacombs @ Feb 24 2011, 02:27 AM) the larger hose, remove it and plug in an air breather... the smaller vacuum hose, remove it and sumbat with a screw.... thanks for the information can i know what is a air breather ?  And how does cost ? the small pipe sumbat with a screw but i see got a y join to the engine filter and link back to some engine part. will post another picture tonight. This post has been edited by monster2020: Feb 24 2011, 09:22 AM |
|
|
|
|
|
chiewwl
|
Feb 24 2011, 09:54 AM
|
|
|
QUOTE(the_catacombs @ Feb 23 2011, 01:55 AM) +1 figures are just figures... its different at each dyno and fluctuates according to engine health... to have a 100whp is a happy figure for 4g1series sohc engine... dun expect much...  |
|
|
|
|
|
the_catacombs
|
Feb 24 2011, 02:13 PM
|
|
|
QUOTE(monster2020 @ Feb 24 2011, 09:15 AM) thanks for the information can i know what is a air breather ? And how does cost ? the small pipe sumbat with a screw but i see got a y join to the engine filter and link back to some engine part. will post another picture tonight.  |
|
|
|
|
|
chiewwl
|
Feb 24 2011, 04:39 PM
|
|
|
mushroom... cendawan... 'tong ku'...
|
|
|
|
|
|
monster2020
|
Feb 24 2011, 05:59 PM
|
|
|
QUOTE(the_catacombs @ Feb 24 2011, 02:13 PM) where to get this a ? How much? This post has been edited by monster2020: Feb 24 2011, 05:59 PM |
|
|
|
|
|
the_catacombs
|
Feb 24 2011, 06:17 PM
|
|
|
QUOTE(monster2020 @ Feb 24 2011, 05:59 PM) where to get this a ? How much? car accessory shop |
|
|
|
|
|
maxgenesis
|
Feb 24 2011, 07:11 PM
|
|
|
cata if fix tht mushroom, wut will it do....?
|
|
|
|
|
|
mivecwira
|
Feb 24 2011, 07:58 PM
|
New Member
|
QUOTE(the_catacombs @ Feb 21 2011, 11:32 PM) overhaul engine den power come back lo... modify abit more power come back lo... dat lubang is where ur coolant return to ur engine from radiator maa.... if around dat area got oil stain shud be from ur camcover laa... camcover oil seal harden d dats why leaking oil... Bro tat lubang if leave it for a while gt any effect or nt..tot wanna settle it 1shot during next service... Before that..wanna change the absorber since the car produce /becoming "king kong" sound d..Any cheaper solution/brand can u offered or suggest? In order to maintain the comfort level... 
Added on February 24, 2011, 7:59 pmQUOTE(monster2020 @ Feb 24 2011, 05:59 PM) where to get this a ? How much? Saw it priced in between RM20 or less.. This post has been edited by mivecwira: Feb 24 2011, 07:59 PM |
|
|
|
|
|
the_catacombs
|
Feb 25 2011, 12:43 AM
|
|
|
QUOTE(maxgenesis @ Feb 24 2011, 07:11 PM) cata if fix tht mushroom, wut will it do....? it allows to regulate the oil pressure inside ur engine... QUOTE(mivecwira @ Feb 24 2011, 07:58 PM) Bro tat lubang if leave it for a while gt any effect or nt..tot wanna settle it 1shot during next service... Before that..wanna change the absorber since the car produce /becoming "king kong" sound d..Any cheaper solution/brand can u offered or suggest? In order to maintain the comfort level... keep topping up engine oil and dont let it run dry... |
|
|
|
|
|
SUSkyheng
|
Feb 25 2011, 12:45 AM
|
|
|
Using this mushroom head.... But not much different... Consider to seal the hole....
|
|
|
|
|
Quote
0.0365sec
1.15
6 queries
GZIP Disabled