Could be data corruption or premature HDD failure.

PCI-E clock will affect the stability HDD, sound card, ethernet controllers, graphics card and possibly other devices also.

Minor tweaking can improve stability but 126MHz is usually too high for a stable set up.

This post has been edited by mengsuan: Nov 19 2010, 09:39 PM

bro..... even 118hz is an insane PCIE freq. if u have been playing with that pcie freq for a long time. most likely u have already corrupted part of your HDD data without noticing it

I didnt know by increasing PCI-E clock could boost BCLK overclocking?..
But really last time, I been experience increasing PCI-E clock but it just bring into BSOD/ worst result..

read it sumwhere at XS forum.. hmm.. not sure oso.. any idea wut i shud do if my bclk lock at 205 only?

This post has been edited by kolong: Nov 20 2010, 01:17 PM

the simplest way for a start would be to further increase your QPI/DRAM core volt. try 1.5V, and see if it works.

orait.. will try dat bro..

p/s: the boring part is burning test.. lazy want to wait..

If not mistaken u're playing with 8X dram and 16X uncore only.
vtt for uncore < 4000mhz should be lower than 1.4v. above this might get BSOD etc..
R3E sucks more vcore for 4.4Ghz core HT off u will need something like 1.4vcore to get it stabled.

yes... 4.4Ghz sucks more bloody vcore. i noticed dat.

btw guys,here sum tweak a bit..

what maximum safe Vcore for i7 with WC setup?

can someone suggest me a pure CPU ONLY benchmark tools or something that show me how much the CPU performance boosted.... I got 3DMarkVantage but I cant stand to wait it run... so long

Hey guys,

Sabertooth X58 review up,

http://forum.lowyat.net/topic/1659657

Feel free to comment

@mets..

post me you bios set for 4.2g's on 975 EE.. ..

just get my r3e from rma.. ..they replace me a new board..

This post has been edited by kaka_89: Dec 2 2010, 07:04 PM

i have never owned an R3E la

what happened to ur r3E ?

mine odw RMA... sad... play zuma use my mum's quaddy pc..

rams socket got prob, didn't detect my rams properly, i've slot 3 GB but identify 1gb instead.. .

LAN socket also prob, LED doesn't stop blinking..

@mets..

i would like to know your CPUV and CPUTvtt on this EE.. ..

It's not too late before the upcoming Sandy Bridge...

nice mobo bro, fail to get the EVGA mobo from u for rm500,haizz~~

Just curious to know how come my gigaflops is a bit higher than kolong's one when my system spec and OC config is inferior than his?



This post has been edited by Sanity: Dec 8 2010, 10:27 PM

His HT is turned on - 4cores/8threads.
Explaination
More

This post has been edited by owikh84: Dec 8 2010, 11:40 PM