Intel Core i7 LGA1366 & X58 Overclocking V2, Discussion, Benchmarks, Stabilty, Guides
|
|
 Nov 3 2010, 11:39 AM
Return to original view | Post
#1
|
 
Junior Member
49 posts Joined: Jun 2010  
|
QUOTE(lichyetan @ Oct 27 2010, 10:33 AM) For R3E, if you take out the stock heatsink, you will see yellow piece of lousy thermal paste, which are causing high temps, you can try to reapply the thermal paste on the stock heatsink, you will see improvements for sure. is it other asus board using that thermal paste?..coz myb p6t northbridge so high temperature |
|
|
|
|
|
Nov 7 2010, 04:28 AM
Return to original view | Post
#2
|
|
Junior Member
49 posts Joined: Jun 2010
|
QUOTE(lichyetan @ Nov 3 2010, 11:48 AM) not sure, never open other asus x58 heatsink. I owned P6T before, you can cable tie a fan onto the heatsink on NB, it cools down quite a lot. done check with nb heatsink..got that yellow termal paste... else you can just take out the heatsink and check .. OC cpu temp load 55c and idle 38c for 3.4Ghz...at 1.26v.. is it ok with that? |
|
|
Nov 7 2010, 12:05 PM
Return to original view | Post
#3
|
|
Junior Member
49 posts Joined: Jun 2010
|
ic ..coz my stock Vcore 1.22v..
i just change my bclk 170 with 20 multiplier.. me still new in OC... |
|
|
Nov 12 2010, 03:06 AM
Return to original view | Post
#4
|
|
Junior Member
49 posts Joined: Jun 2010
|
mine i7 920 3.6gHz on 1.2v ..temp load +-60c.idle +-40c...
is it ok?? |
|
|
Nov 12 2010, 03:30 PM
Return to original view | Post
#5
|
|
Junior Member
49 posts Joined: Jun 2010
|
QUOTE(gengstapo @ Nov 12 2010, 02:19 PM) I dont know, but I feel it quite impossible. Even with WC also could hit 60c++ unless you place the machine in very cool room i'm using WC..but in fan room..not aircond..with cyberjaya temperature   max temp core load 62c.. btw still in process learning OC ...just try set the vcore to 1.2v.. not sure about HT..myb on..  coz not change anything yet other than bclk and vcore ... still newbie..  |
|
|
Nov 12 2010, 05:50 PM
Return to original view | Post
#6
|
|
Junior Member
49 posts Joined: Jun 2010
|
today done test with prime95 3.8gHz 1.25v ...temp load 66+- ..
idle 44c+-..HT on.. |
|
|
|
|
|
Nov 13 2010, 12:14 PM
Return to original view | Post
#7
|
|
Junior Member
49 posts Joined: Jun 2010
|
hit 4Ghz ...change the multiplier to x21 and vcore to 1.28...
trying vcore 1.5v...but get BSOD... temp idle +-40c..load 70c » Click to show Spoiler - click again to hide... « |
|
|
Nov 14 2010, 03:50 PM
Return to original view | Post
#8
|
|
Junior Member
49 posts Joined: Jun 2010
|
haha..typo..1.25v..sory..
want try 4.0Ghz with 1.25v..but get bsod.. This post has been edited by trepidationmutt: Nov 14 2010, 03:51 PM |
|
|
Nov 26 2010, 06:49 PM
Return to original view | Post
#9
|
|
Junior Member
49 posts Joined: Jun 2010
|
what maximum safe Vcore for i7 with WC setup?
|
|
|
Dec 20 2010, 08:39 PM
Return to original view | Post
#10
|
|
Junior Member
49 posts Joined: Jun 2010
|
Vcore 1.39v for 4.4Ghz is it normal?..wat max Vcore for wc setup?
|
|
|
Dec 30 2010, 08:38 PM
Return to original view | Post
#11
|
|
Junior Member
49 posts Joined: Jun 2010
|
why p6t se manual OC Vcore cant 1.4+?..it is need to change jumper??..
but auto setting can get 1.45v... even disable HT and uncore same also cant.. |
| Change to: |  0.0380sec
 0.33
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 03:25 AM |
Quote
