@mets..

gflops x stabil.. ..bahaye tuh..

@lichyetan

woooo.. ..patriot VR par with my dom.. ..

running that for 24/7 ar bro..?..

@gengstapo

nice clock there,what rams are you using..?

try and push your rams too..

are you on wc..?

try and increase you cpu/vtt notch by notch..

and for your rams, try 9-9-9-24/88 1T or 2T..do some linx test 20 times..the size of memory should be ALL

@mets..

post me you bios set for 4.2g's on 975 EE.. ..

just get my r3e from rma.. ..they replace me a new board..

This post has been edited by kaka_89: Dec 2 2010, 07:04 PM

rams socket got prob, didn't detect my rams properly, i've slot 3 GB but identify 1gb instead.. .

LAN socket also prob, LED doesn't stop blinking..

@mets..

i would like to know your CPUV and CPUTvtt on this EE.. ..

@jerrywan

nothing bad will happend if you disable or enable the feature bro..c1e function is quite similar with EIST..it actually protects your cpu from overvoltage..

if you disable the c1e function, it means that the voltage that was supplied to your proc will be maintain...disable c1e function usually does help in oc..that why most people who oc, they disable that function in order to get their desired voltage..

i think is okay la bro..my ordinary 1600cl8 dom runs at 1866 without fan.. ..vdimm at 1.66v.. ..

have you tried pumping more vcore dude..

try 1.3-1.35v..

intel's specs on cpu/VID range tells that it should be in the range of 0.800V-1.375V..

is still safe to be within the range...

try to set dram freq the current setting, and try to push more vore..

lucky to get that golden cheap tho..

i'm running 4.0g's on 1.35v..huhu..nothing much can be expected from a C0 stepping proc..

---

Added on May 21, 2011, 3:11 pmtry search for

vdimm = Dram Bus Voltage

VTT = QPI/Dram

what mobo are you using..??..

This post has been edited by kaka_89: May 21 2011, 03:11 PM

don't pushed further dude..afraid you proc will burn.. ..

one thing i found interesting in C0 stepping proc's is that it can handle high vcores..i've reached cpuV till up to 1.46V..when trying to get 4.4ghz.. ..

windows was able to boot up and running prime95 for several minutes..however, it crashes when on linx test... ..load temp was at 70-75..

what's your idle temp dude, kinda weird when you are saying it is still hot even when it's full watered.. ..

This post has been edited by kaka_89: May 21 2011, 09:06 PM

how many rad did you use..?? is quite hot imo..

my temp never reach 75 on 24/7 use..i'm using triple rad for the cpu, another dual for the GPU..

another question, did you manage to get 4k uncore and 2k on rams speed..??..notice the GT's you use on your siggy.. ..if so, what's the cpu/vtt..?

i'm getting 4.4g's on 1.475v core..windows booted but is not stable...

i'm considering for 1.5vcore..

i almost kill my r3e tho...i'm not sure what's the reason..but is restart's suddenly and then i was unable to booted up even on default settings...

BSOD comes in whenever after BIOS loaded.. ..tried to completely off for 10 mins and run again..

i was so relieved that it booted up safely.. ..but i could here some current on the board SB when load.. ..

cannot find any leak bro..

i'm using full block on board..at that time my QPI/VTT was at 1.4v@ 34xx uncore..is that too much..??..i'm on i7 965..can't expect to lower the vtt on c0's..huhu..

i don't leak is the issue here..coz the water in the res doesn't becoming lesser and lesser..

maybe is due the high QPI/vtt.. ..btw, i just let it at stock for now..

i've checked everything bro, no current leak at all..i think is due to my proc IMC or my setting for oc is not set correctly,

it's all started when my system restarts automatically when i was playing game, after that, i didn't manage to booted up to windows even on default setting..BSOD comes in after the window loaded...

however i've manage to take not on the BSOD ss, it indicates something bad pool management or head someting like that with the code 0x73fe6473 and memory management error 0x0000003e..

i'm quite scared to oc now..afraid will loose my board for the second time and it take quite some time for rma..

that's what i suspected too..but, i got no extra rams to try..

i can hear an 'eeee-eeee' sound on the board and it is obvious especially when extracting the files..

besides that, i'm facing some kind of lagging or jemm for several seconds when playing games sometimes..huhu..

last night instead of 3gb of rams, my system detected only 2gb..

i've took one stick out to find which stick is the culprit..however, i found that all stick actually works after trying each stick on only one slot..after that, i tried each slot...all slots are working.. ..

trying to re-slot back all the rams, 3gb detected back..

what do you mean bro....??

i've run linx on default setting w/o issue..kinda weird..