That's very cool. What cooler are you using? Is your i7 HT on or off?

I dont know, but I feel it quite impossible. Even with WC also could hit 60c++ unless you place the machine in very cool room

I'd to agree. I'm using the same 3.6GHz @ 1.1V instead of 1.2V. Yet he has 10c lower.

i'm using WC..but in fan room..not aircond..with cyberjaya temperature
max temp core load 62c..

btw still in process learning OC ...just try set the vcore to 1.2v..
not sure about HT..myb on..
coz not change anything yet other than bclk and vcore ...
still newbie..

If default then HT on. You have good temperature. No worries, clock them up!

if based on ur cpu-z validation at ur siggy...ur HT is on...
straight go to 4ghz bro...ur temp is nice+on WC also...

today done test with prime95 3.8gHz 1.25v ...temp load 66+- ..
idle 44c+-..HT on..

Hmm thats great. There more room for higher clock
Clock it to the max~

linx 25 run in diagnostic mode with kingston kvr 1333 C9(half size)



still trying to get this ram stable at 2k mem...
vtt already raise to 1.55v...

currently vtt @ 1.47(bios)
vtt 1.45(windows)
vdimm 1.63v

This post has been edited by selfdz87: Nov 12 2010, 08:15 PM

hit 4Ghz ...change the multiplier to x21 and vcore to 1.28...
trying vcore 1.5v...but get BSOD...
temp idle +-40c..load 70c

1.5v vcore is too high dude even for WC...
u want to kill ur proc??

Uhh, 1.5V?? Your want to try what speed??

LN2 cooling will go very well with 1.5V settings.

haha..typo..1.25v..sory..
want try 4.0Ghz with 1.25v..but get bsod..

This post has been edited by trepidationmutt: Nov 14 2010, 03:51 PM

i just update BIOS which is 1408, seems nothing gained. Voltages are all the same with last setup. Hoping to decrease volt a bit~

Haihzzz...

i gained alot from this bios version, finally i can boot into windows with 4000 uncore and 2000mhz ram~finding way to make it stable now, last bios 1303 cannot boot into windows with 4000 uncore~

everybody sooosososo rich..

i want WC also.....

what ram u use bro??
same like ur siggy??
how much vtt is needed to achive 2000Mhz ram speed w/ 4k uncore??

ya, same like my siggy, still testing now~~but using 1.525V now for VTT~not yet stable~windows reboot after 1 round of linX

---

Added on November 15, 2010, 10:32 pmis it safe to set my vdimm to 1.7V??

---

Added on November 15, 2010, 10:32 pmis it safe to set my vdimm to 1.7V??

This post has been edited by chenhui87: Nov 15 2010, 10:32 PM

No problem. I tried 1.74V on cheap Kingston KVR1333. It isn't even hot when touched.

You just have to ensure Vtt difference is not more than 0.5V. Usually motherboard BIOS will take care of this for you.