@ babyelf

your 2x512mb bh5 not bad huh so far i can go up to 253 @ 3.7v could it might be due to nf2 chipset? since i didnt found other better rig for me to test my bh5.

yep babyelf bh-5 is really a gem...
just hoping mine can pass 260fsb.
since from vrzone got ppl using the same ram as mine
can do up to 268mhz...
really will took my some time to get there.
burning in is really important to get the ram potential.

@ rzonealley

your ram batch is same as that one from vrzone? where is bwan? long time didnt see his post...

gsan.. for urs it's a different case i think.. on nf2 platform it doesn't do as well as on the A64 platform..

nf2 u need to turn up the VNB to get it running higher.. i'll keep those sticks for now if i were u.. don't sell it.. i'm lucky to have gotten mine 2nd pretty cheap..

rzonealley.. yea i'm really lucky to have gotten this one.. really a nice pair i have here.. i'm sure urs will do the same
if i can get a pair of G.Skill later on might let my bh-5 rest for a while..

seem near the same batch just differ few numbers and in small margin..
i think bwan took a vacation since its school holiday...
maybe bwan is back here. in peninsular m'sia.

hoping it will be around ur clock... compared to last mushkin blue line i have
this ram far better than that even price ranging around the same.

VNB ? izzit you mean the northbridge vdd ? I'd the pencil trick to get higher vdd, but since i dont have any multimeter to measure the reading so i'm not sure that it's really working or not.

yep northbridge .. get a DMM la lol..

rzone.. so u got the twinmos eh?

yep... TMSP DDR PC3500 X2 512MB...
hope to see flying result..
maybe next week will ask arj to take care
of this ram...

haha ic.. nice..

is it cheaper than the value vx? value vx is BH based now

my own testing
http://xtremesystems.org/forums/showthread.php?t=63346

This post has been edited by babyelf: Jun 12 2005, 12:36 PM

Oh, IC, because the ones din was selling carries CH5 UTT. But he is selling the VX cheaper than the TwinMos.

when i brought the 1st batch of OCZ VX, it was CH5 UTT, and the rated speed on sticker is 7-3-3-2.5

but 1 of my customer (remysix) reported that his replacement Value VX from OCZ is now rated 8-4-4-2.5 (on the sticker)

maybe that's the sign OCZ has moved to BH5 dies for VX Value ?

anyone here with DFI NF4 Lanparty board stay around my area (B.B.Bangi)

i would like to come to your house and do some testing on my HyperX BH5..

i know it's a gem, and i would like to know its maximum speed..

currently,

with my Athlon XP-M system,

it can do..

240 MHZ @ 11-2-2-2 @ 3.0 VDIMM @ Memtest Passed
250 MHZ @ 11-2-2-2 @ 3.1 VDIMM @ Memtest Passed
255 MHZ @ 11-2-2-2 @ 3.2 VDIMM @ Memtest Passed
260 MHZ @ 11-2-2-2 @ 3.3 VDIMM @ Memtest Passed


This post has been edited by dinster: Jun 12 2005, 12:53 PM

Cool, is this the one that failed to P.O.S.T with the AI7?
If I'm not mistaken, it's 256 x 2 right? What about 3.5vdimm? able to scale higher frequency?

how come BH-5 runs at less tight timing compare to CH-5?

COOL.. i just bought p4c800 dlx , might going to vmod it.

by thw way, do u mod the mobo?

i got 1 stick xms3200 v1.1
who hav try max of tis ram...i cant try cos my mobo limit at 230

anyone?

My recent foray into A64 yielded this ... score of 7247.

This post has been edited by jarofclay: Jun 12 2005, 04:37 PM


Attached thumbnail(s)

din.. those sticks look really good.. too bad i'm not there.. if not i'll test it for u.. plus i got DDR booster now

OCZ didn't tell me when they did the die change or how to tell a die change.. they just changed it..

the rated speeds does not mean that the die has changed if i'm not mistaken.. it's just that when they test the chips they realised "oh it will run at a tighter speed" and relabled them to those speeds..

if u want i can ask for information about the die change..

one very good test is to test with CAS3 and see whether it boots.. and if it doesn't then it is BH-5

i've seen 2.5-3-3-7 and 2.5-4-4-8 and they perform similar.. so no biggie there

This post has been edited by babyelf: Jun 12 2005, 04:45 PM

nope.. different pair it is..

however that pair is a gem as well..

it can do 255 MHZ @ 3.3 VDIMM @ 11-2-2-2 @ 1T @ Memtest Stable

but it sux with my friend's ABIT AI7

yes it's 256mb x 2

forgot to mention that the testing rig was DFI LP NF2, so the max vdimm is 3.3V only..

a mystery to me as well..

thanks for the info on testing whether it is BH5 or CH5 chips..

yes, we all here would be grateful if u can ask OCZ about the die changing in their VX Value series..

why 8-4-4-2.5 and not 7-3-3-2.5 anymore ?