New windows. But still same.
Now trying to tweak VTT. My case really weird.

-pWs-

well yeah..

it started with the maximus and rampage

on perfect overclock setting.. will pass every test on load but once in a while on idle.. comp will bsod etc

guys, wat's the acceptable nb temp. for 24/7 loaded?
is more than 50c... sounds not ok?

i cranked up my vcore to 1.30v@bios yesterday for 3.2ghz
and the nb temp shoots up.. lolzz.
i'm ok with my cpu temp but not the nb >_<

night time nb @ 49c
morning, i forgot to watch it today, but should be at least 55c or less.

already ran for more than a day for that temp.
worried here. lolz

might wanna back to 2.8 as it needs only 1.18v@bios & nb_temp@40c@loaded@night)
3.2@1.30v@bios sounds like diminishing return from 2.8@1.18v@bios
kinda not a healthy boost.

i tried mine at 0.975v@bios , 0.8XXv@cpuZ when dual-orthosing;
but no screenie for u

but my stock clock is 2.13ghz lah

E3110 @ 500x9 1.4v 5:6 4-4-4-4
SuperPi 32M - 10m 35.14s

woah.. what stepping bro?..

Anyone w/ 8400 Q807Axxx batch here? can share oc result? good batch or not?

CPU : Intel Xeon E3110 Wolfdale
CPU clockspeed : 4.05Ghz
Motherboard : Gigabyte P35-DS3 Rev 2.1
RAM model : Kingston Value Ram DDR800
RAM capacity : 2X2GB
RAM speed : 450Mhz 5-6-6-21
RAM mode : Dual channel
Cooler : Intel Stock
Time : 12.219S






Attached thumbnail(s)

ok new board = new OC results.

will do it this coming weekend.

If my memory serve me correctly,i can do like 11.4's with this speed

show us

Hi all. I may be late for this as i'm using an old proc E6600. Please share your views on my OC stability as i'm still new in OC

Prime 95 and CPU-Z screenies:



Super PI mod 1.5 XS screenies:



OCCT screenies:



My rig:
Intel Core2Duo E6600
Gigabyte 965P-DS3 BIOS F12
Micron D9 DDR2-800 (512MB x 4)
Enermax FMA-II 460W
Xigmatek HDT S-1283

Thanks for viewing and hope to hear your comments for OC improvement

This post has been edited by Archaven: Jun 17 2008, 12:04 PM

Some benching screenshoot.

10.172's 1M PI

12minutes4's813 32M PI with 4000mhz


This post has been edited by OC4/3: Jun 21 2008, 01:33 AM

Here you go.

This post has been edited by apexi78: Jun 27 2008, 03:20 AM


Attached thumbnail(s)

woah.. wat ram u using?

Not bad.About the same as my time but don't take ss

all brothers..just want ask here..
is it ok for my E8400 run 24/7 at 3.8ghz using v1.31..?
cause i dont know what`s the safe range of vcore for this processor..
but the temperature seem to be ok..just need piece of advice from u guys

the max safe Vtt/Vfsb and Vcore for 45nm is around 1.4v...

i guess ur vcore is pretty fine ba....

It is ok.

Hrm... another try today.
IcEMoCHa: Sucky Tracer


Attached thumbnail(s)

11.282 on my ex e3110 which i miss

---

Added on June 30, 2008, 1:40 amNew Super PI benchie

CPU : C2D E8400
CPU clockspeed : 4.680ghz
Motherboard : Abit IP35 Pro
RAM model : Corsair Dorminator 8500C5 Rev 1
RAM capacity : 1GB X 2
RAM speed : 520mhz,4-4-4-8-2T
RAM mode : Dual channel
Cooler : Custom liquid cooler



This post has been edited by OC4/3: Jun 30 2008, 01:40 AM