bro forbidden84,what u trying to do actually?

hehe..this tkh_1001 bro really nice guy..
last time also help me on this

weh tkh_1001,dont waste ur time..
go push 550fsb..

all brothers..just want ask here..
is it ok for my E8400 run 24/7 at 3.8ghz using v1.31..?
cause i dont know what`s the safe range of vcore for this processor..
but the temperature seem to be ok..just need piece of advice from u guys

no wonder i never reach that speed..
my e8400 run at 1.31v only reach 3.8ghz

any asus board wif p45 chip perform as TPower I45?

bro Ace,what board are u use eh?
arr..wonder why i cant load those picture..~

guys,want ask here..
im using E8400 but bit worry wif my temperature..
cause i dont know what exactly the temp is..
as i want to run my rig at 3.8ghz at 1.32vcore
the temp i get is around 45`c(by real temp) but from my board indicator show 35`c ..
so how am i going to do with it?follow from board indicator or use realtemp?sorry for this question but pls give me some advice

This post has been edited by fesick: Jul 20 2008, 07:54 PM

i use Biostar TPpowerI45
pls take look picture here >



This post has been edited by fesick: Jul 20 2008, 11:15 PM

err bro enson..isnt that good ady? the ram freq increase thats good loh..

it will only cause instability..

depend..u satisfy?
if not just push to limit loh..hihi

budget?theres lot cooler out there..
if your budget around rm200 try take look of cooler by xigmatek ..

ya agree agree..even me dont know what temp should i follow
core temp,real temp,from bios all give different result..

nvmind then i just give one from bios reading
intel E8400 at 3.8ghz ,1.32v idle 31`c load 34`c - 36`c

even my vanilla xigmatek also good enuf ady..
why not yours..just make sure u install properly ok la

49`c?but we not sure if that is the real temp..
if u check the temp wif different utility all result are not the same

thats the problem..
i ask here b4..now still confuse which are the real temp..
but for my motherboard..got temp indicator inside..
if what shown at it is real im happy ady

ya,but for enson case he might get confuse with it..
u know what the Tjmax ka bro?i cant find any webby


err..sorry,i mean the one wif digital screen

mm..thats what im still thinking of..
but what it show are same with few other utility

and guys,i think my core temp is quite high..

on load core 1 and 2 is 49`c to 53`c

same wif my case..
my asus p5kc and now biostar give different reading also..
is it cause of the chipset?
just now i try use everest ultimate to read the temp
cpu temp is 32`c and only the core temp too high..
err sorry for noob question,which one we should consider when we OC?the cpu temp or the core temp?for me either if one of the temp high sure
i`ll do something for it