Shall try when I do my next oc...

Ram is 1028. 1:1, can't go any lower.

your base clock raise until 514mhz?

quite confuse with this~

i changed my FSB to 250 and my e4600 can run at 3.0Ghz.. but the problem is when i run prime95.. the temp will rise straight to 70.. how can i lower the temp?? HELP!!!

what is the vcore?
what cpu cooler you use?
casing got good air flow?

vcore at 1.392
cpu cooler CM TX3..
i doubt the casing airflow is not so good.. bcoz when i open the side panel.. the temp drop abit...
what should i do??

This post has been edited by MaKaNg: Oct 6 2010, 04:03 PM

re-apply (?) thermal paste, clean dust from ur heatsink. dunno bout vcore as i nvr OC lower end proc~

or u can get some powderful fan (as exhaust) to suck the hot air out~

no budget lol.. will try this as i get most of the opinions are same as urs... thanks dude!!

1.392v is the lowest vcore to make the overclocking stable?

no.. it didn't.. BSODed.. im a really newbie in OC.. so u suggest i shud drop how much?? i set it to auto b4..

you mean 1.392v also bsod?
check dram clock as well.

im using 2gb kingston ddr2 800 and leave the dram to auto.. wat shud i do??

maybe you overclock the ram as well.
until it reach a not stable state.

wait. u want to lower ur temp but ur OC is not stable. am i right?

is ur OC stable?

i dunno to call it stable or not.. run prime95 for an hour.. no crash.. but the next day.. suddently BSOD when i was playing game.. dats y i lower it to 2.88Ghz..

This post has been edited by MaKaNg: Oct 8 2010, 12:52 PM

then maybe not stable, if crash in game because of overclock.

one hour is not enough btw. see ppl recommendation on how to stress ur pc for stability check~

yup.

i stop at one hour because the temp is at 70.. is that a prob??

show some cpuz screen shoot.
cpu, mainboard, memory, spd tabs.

This is when im running at 2.88....


Attached thumbnail(s)