System specs? Have you tried setting RAM to 1T?

My pc spec is Kingston kvr 2 x 1 Gb , 3 3 3 8 ,hynix tp d43

Amd 939 3000+, E6

Abit KN8 Ultra v 1.7

Winxp sp2 complete updated.

I tested with :

240FSB * 9 = 2160, hyperstransport = 4x

Bios Ram setting > ddr 333, cl3 3 3 8

Vcore > auto, abit EQ Vcore > 1.42v
abit EQ cpu temperature > 43 C (full load)

Super Pi ( 1M ) > 40.3 s
3d mark 05 > pass

I will try 270 FSB * 9 = 2430, hyperstransport = 3x

Bios Ram setting > ddr 333, cl3 3 3 8

Vcore > 1.5
vdimm > 2.7

some 1 can verify my setting is correct?

This post has been edited by kodtm: Apr 26 2006, 12:06 AM

290 FSB * 9 = 2610, hypertransport = 3x



Amd 939 3000+, E6
Abit KN8 Ultra v 1.7
Winxp sp2 complete updated.
Kingston kvr 2 x 1 Gb , CL3 3 3 8 ,hynix tp d43


Bios Ram setting > ddr 266, cl3 3 3 8

Vcore and vdimm > auto, abit EQ Vcore and DDR > 1.42v and 2.66v

abit EQ cpu temperature > 47 C (full load)


Super Pi ( 1M ) > 34.7 s




300FSB * 9 = 2700, hypertransport = 3x

cant load windows, appear blue screen then restart.

emilz, haf u tried checking the RAM timing? coz AFAIK, Abit mobos are able to reset the setting everytime an unsuccessful oc haf been done.. since uya proc aint clocked dat hi, mebbe bcoz of the ram.... juz check to make sure.. hope dat helps

i check already seem no problm 2.7V at ddr333 and 2t

how

This is what i've encounter abt Blue-Screen

Error Message : Bad_Pool_Memory_management
Ram hitting the limit. use A64 Tweaker to set divider (150,140,133,100 etc.) My mobo doesnt have "weird" divider, so have to use a64 tweaker or better, A64 info. More stable than A64 Tweaker.
http://rapidshare.de/files/18964143/A64Info.rar.html

Error Message : IRQ_less_or_equal
Increase chipset voltage 1 notch.

Actually i cant see any things from blue screen because it appear not more than 2 s then restart.

u can set the blue screen halt ( no rebbot if blue screen occurs )

vcore > 1.5v
vdimm > 2.7v

300 FSB * 9 = 2700 ( satisfy )

super pi 1M > 33.7s

but Prime 95 test fail. How how to fix this problem?

This post has been edited by kodtm: Apr 26 2006, 09:06 PM

might be this limit for ur proc dude.. if u dare.. hehe.. burn it more.. can we know your cooling system ?

normal fan only, now testing prime 95

8k - 512k all pass, waitting 8 hours test.

bios setting > ddr 333 , cl3 3 3 8
vcore > 1.42v ( abit EQ > 1.44v )
vdimm > 2.7v ( abit EQ > 2.74v )

280 FSB X 9 = 2520 (ddr 460)

full load 54 ( abit EQ )

This post has been edited by kodtm: Apr 27 2006, 02:13 PM

Perhaps you'd like to run the mem settings at 3-4-4-8. See if that helped.
Your E6 should be able to run 2.7ghz with ample cooling @ 1.55V. Slowly increase the vcore uptil 1.625V until you hit the jackpot for stability. However, make sure cooling is good enough.

sory asking stupid question

where to set 3-4-4-8 i know it was in the ram timming setting but which one because there was to many to set

Check the attachment.

This post has been edited by jarofclay: Apr 27 2006, 06:41 PM


Attached thumbnail(s)

Venice 2.52 GHz (280 x 9) _ 5:4 _ DDR 460 _ cl3 3 3 8

vcore > 1.42v ( abit EQ > 1.44v )
vdimm > 2.7v ( abit EQ > 2.74v )

8 hours Prime 95 test > 0 error 0 warning.

Super pi 34.5xx s

This post has been edited by kodtm: Apr 27 2006, 09:56 PM

tq bro

how about the other timming oso need to kacau or just them

If you know about them, you could do it. I just leave them out as auto as I did not have time to google other forums for that info. Perhaps you could try to find out those info from other forums and post it back here if you're really interested; that way you could help the rest of the Fatality brotherhood here as well.

Ok, i have a problem here = ="
for the pass several days, my pc keep on having blue screens and from the looks of it, its would seem my Mobo(Fatal1ty an8) is dying =.="
Why did i suspect my mobo? i have ask around of my frens and they say its posibly that it is the mobo, firstly blue screen after enabling Bitcomet, second is blue screen while playing "ragnarok online", thirdly is where the system reboots after i try to dail-up my connection(streamyx)

Anyone get this kinda problems? im just wanna make sure that it is my mobo, since i dont wanna drive back all the way to lowyat to change a newer one if the problem is not the mobo, and FYI, none of my hardware are Oced.

did u oc, maybe ur setting wrong...

Nope i didnt Oced at all, just change the bios to ver20.