AN8 32X overclock more better and speed faster than Fatal1ty / AN8 Ultra

Both PCI-E slots run @ 16x when in SLI mode due to the NB having more lanes than the previous SLI NB.

change the mobo like ur's

huhuhu..ur mobo price tag make person like me cannot affort lah

drop you Htt multiplier... LDT in bios to 3X or 4X
So you can increase the HTT of your cpu...
(LDT 5X) X 200 HTT = 1000 ( will be x2 in motherboard so = 2000 Hypertransport already)
Never go higher than 1000HTT or you won't have a stable oc

wat the different for 7.8us and 15.6us?
many performance different?

This post has been edited by cyberian: Mar 23 2006, 08:34 PM

want to ask u guys sice u guys used ur fatality did u guy having any problm wif bios or something like hang or anything ka

mine always hang at bios n some times cannot acces bios n last time got problm already wif the bios

want to trow already my board n take new board lar?????

any suggestion

hang at bios when i use abit an8 ultra.. problem solve when i change psu to the new one... i think it hang because not enough power (using icute = 4 hdd + 2 optical drive + 4 case fan, hhehe)

what PSU that u use ??

acbel 550w gold series

is it ka????
conform ka

want to ask lar y everytime after i off my supply to my comp, n when on it back the bios promp that the cmos already been cleared......
yhe only thing that has been reset was the cpu freq lets say i set it to 250Mhz and it reset it back to normal setting 200

why????? ar it be like that

y arrrr



This post has been edited by emilz: Mar 29 2006, 06:20 AM

AFAIK, mobo has itz own mechanism to reset its own setting(if they r capable to) if u OVER-overclock.. ahhahaha. meaning, the mobo kenot tahan already.

xplanation using metaphor:
mum ask Johnny to wear the pink pants coz it looks nice. Johnny kenot tahan, once mum leave the room, he change into a Bermuda again. ahahahaha

datz wat i think personally. correct me if i'm wrong guys.. my AN8 only behaves dat way when it is overclocked. not in stock setting.

ok let say i oc it 2.4 n up only 0.4 for the frequency
voltage supplied through it only 1.45V
voltage supplied to ram 2.70V n the fsb set to 4x multiplier n the setting of the ram that one depends on someting2 lar

it still the same results last time when i oc it it goes smoothly no problem until now only

y arrrr

Guys, want to ask abt AN8 Fatal1ty SLi. Planning to upgrade my rig next week. these are wat i have in mind.

Mobo = Abit AN8 Fatal1ty SLi
RAM = TCCD DDR600
Proc = Opty 146
gfx = 7600GT

i've heard n read abt the AN8 1T memory probs but frm extremesystems n official abit forum, it only affect certain core; Venice, Winchester, San Diego. izzit true or opty is "1T memory problem free"?

This post has been edited by satanhead2003: Apr 1 2006, 04:58 PM

i am using Opty 146... yup.. having 1T problem also.. :-(

AN8 SLI here , no probs with 1T or anything.

1T issue normally happened when RAM running at 250Mhz above for 1:1 setting
if using divider, with lower frequecy of RAM, the problem will not happen.. as i tried it before

This post has been edited by cyberian: Apr 2 2006, 01:23 AM

How sad. I'm hoping opty not affected by this. btw, cyber, have u tried solution suggested in extremesys forum? n what bios u're using; modded 20 or official 20?

suggested in extremesys forum

set bypass mark to 2x

Actually, running at 1T below 215 to 220HTT is quite okay for the ram. It also depends on what RAM you own. For example, I used the D43 ram with Fatality no issues upto 253HTT on 1:1.

However, when I changed to UCCC, the issues cropped up as above. I've tried 19 or even 20 bios, but issue remained.

So, it's best to stay off this mobo and get something like DFI or Asus. The Asus A8N32SLI is running my UCCC now at 275HTT @ 1T. I also tried Winchester, Venice and Manchester, all are affected by this issue.

maybe i ask abit KN8 ultra mobo is beter than an8 ultra..term of performance..
sorry out of topic..

how to delete my extra post?? i jus post single 1 but posted three instate..very sorry

This post has been edited by shift2: Apr 3 2006, 01:14 AM

hmm... so the fatal1ty is out of the equation now. can u guys recommend me a mobo ( except DFi ) with rm650 max budget?