did you disable after windows install? or did you reinstall after you disable? i've read about this APIC in abit forum. majority says better MHz after disabling.

"vCore Fluctuation Fix"

how did you do that ?

BTW: try to feed your cpu with more voltage.

@ Dead__Man

you did the vcore fluctuation pencil trick, right? i just wonder that have you faced the problem that cant get over 1.85v after doing the trick? because once I set the vcore over 1.85v, the mobo cant boot and the beep sound will be heard.

@ cubchai

yes, disable APIC will give more fsb. But for my case, the extra 3mhz fsb cant cover back the lower bandwidth.

@Mr_47
I have an unlocked CPU, so I just change the multi when aiming for FSB.

@gsan
I have never tried anything over 1.7v. My Athlon, though good rating, is a power hog. Load at 52c on 1.675 with a Thermalright SI-97, and that's nighttime. Sometimes during the day it can go up to 55c.

most important is the mobo & tictac's bios can go 267Mhz @ 2-2-2-11 CPC ON (1T)
APIC not too sure got off or not ..Bandwith ard 4100?

well the apic is a long debated issue

btw mr47 why your d43 can do 2-2-2 timings?

that's right...

is it tictac's bios have some function that the original bios don't have, that made my bios corrupted when i flash back to original bios from mantarays?

you're the sifu of NF7 , 267Mhz @ 2-2-2-11-1T

what type of ram n vdimm n bios TUNe using??wow

when you flash back to abit bios

did u select the load saved settings?

if u do

sure gone

i've forgotten. usually after flashing i have to reconfigure the bios again.
i jsut checked out the price if i order a bios chip from abit-usa thru a fren. ranging from $27-$110, time from 4-6weeks for $27 and $110 for about a week. some sites charge $20+, delivery time 10-14 days.

when i change from stock bios to mantaray xt 2t it just does!

before that cannot,,,,,, even if i feed it with 2.9V and low fsb

now is okay,,,,, can do 2-2-2-11 2.8v at max stable fsb 230 x 11 ..

but i just use 210 coz the temp for 230 is too high,,, reach 57+

now very happy

This post has been edited by Mr_47: Jul 31 2005, 12:56 AM

someone should list down how many ppl here are using moded bios and what type of it!

just extra idea to keep this thread alive.

d27_619R2 by trats

max. stable fsb 252 @ 2-2-2-11, 1T

1T??how come i never try be4.

32bit system can run 1T
?"

can what, im running TCCC @ 2-3-2-11 @ 1T @ 210

where u d/l this...im uisng merlin D27....dual channel with BT n CT 512MB
D43 double sided...cant pass 210FSB timing 2.5-3-3-11

http://members.lycos.co.uk/hallampg/BIOS/BETA%20BIOS/Trats/

Edited ......

This post has been edited by ivandj: Aug 3 2005, 04:34 PM

i've change back my mantarays xt 2t to 3dfire 2t

coz

more stable.
cooler cpu temp.
not sucking too much v.
get my bf2 no ctd.
3dmark 03/05 more point,,, + 50

This post has been edited by Mr_47: Aug 4 2005, 11:16 AM