thermal throttle should be turn off for more stable oc

normally it takes 2 months

double post


This post has been edited by Radeon: Jul 18 2005, 08:47 PM

what happen?

i think you need to hotflash liao

how can that happen?

you power down?

or you load last known configuration.

what was wrong?

if the bios file is corrupted,
then you really need to hotflash already.

stock as in the version 22?

well the apic is a long debated issue

btw mr47 why your d43 can do 2-2-2 timings?

when you flash back to abit bios

did u select the load saved settings?

if u do

sure gone

what hapens if used 1T with double side ram?

all also lower better

but the row active delay u would like to use 11
coz it gives be best ram bandwidth

This post has been edited by Radeon: Sep 3 2005, 01:11 PM

does anyone of you have problem on the ram slots?
i think my 2nd ram slots are dead, third one needs skill to work too, sometimes can sometimes no

lol thanks

but you let me think of other thinks lah

i got an issue here,when i using memtest i can run 230mhz 2-2-2-11 pass all the tests no problem

but when entering windows the applications tend to crash especially warcraft 3 ||| and games, all the applications are ok, it just crashed though ( not in blue screen) any one of you encounter this kind of issue? It still happens even though i max out my vdimm at 2.9V.

not likely, i'm using redlines and 2.9V is not an issue.

i see, i will try it out, but i seems weired doesnt passing memtest means that the configuration is stable? Furthermore, i'm using 2T and imho 220mhz on 2-2-2-11 is not quite a big push.

why agp?

doesnt quite make sense,
it's the memory i believe that cause the problem as there are indication in the war3 error log
200 mhz it runs fine and 220 mhz it crashes doesnt sound like a video problem to me

well i'm using xtreme-g
will give it a shot though

just use the software and flash it

if you flash the wrong bios you might need to do a hot flash

er...
i don't think so man,
if anything screwed although inside windows you are screwed also,

flashing halfway can power off = corrupted bios (don't try this at home)