Trats bios offer 3.3v vdimm? IF not anyone hav guide for vdimm mod ? I on D26 mantaray 1T . Doin 220 15-3-3-2.5 at 2.9v. Not enuff juice from psu . :'(

BTW where can i get link for trats bios?

This post has been edited by Cyclone87: Aug 13 2005, 04:08 PM

here's the vdimm mod (dirty punk)



this mod depend on your psu 3.3v rail as well.

one question here,

actually how do i know the L12 wire mod is success? izzit i clear the bios, and mobile detected as 166fsb ? coz normally is 100fsb?

i'm using trats d27 mod. bios now, i dunno this bios got soft L12 mod or not, but when i load optimal in bios, it set to 166fsb.

This post has been edited by gsan: Aug 14 2005, 12:42 PM

load optimal in bios got 166fsb .... is 50% success da most easy to detect .... if u can pass 240+ without doin wire mod that means soft L12 mod is inside dat bios
-
cons
nothing beats wire mod L12 those soft L12 won't go as high FSBs as the hard 1

If detect as 166 when clear to optimal, does that mean the L12 success force the proc to Fsb166 or Fsb200? IF fsb 200 , y it didnt show fsb 200 when we clear it to optimal value?

nono... i mean...
i already did the L12 wire mod, but i dunno it success or not....
i just load the optimal in bios, and i got 166fsb, so does it mean I success? maybe it's due to the soft L12 mod.... coz i dunno for the soft mod, izzit also same when load the optimal in bios also got 166fsb.

yeah that should be it gsan.... a mobile will be detected at 133 if u dont do the wire mod....
I've done it for mine and now its detected as a 166 default.
can go much higher fsbs too.

another way to knw is to flash to non-soft mod bios lor if still got 166FSB on load optimal means the hard mod is on

anyone can what's the bios for 2x512MB utt bh5 on NF7-S?

i cant overclock my new gskill GH at all @ any vdimm

Hai .... i also using NF7-S v2 ...

I hear have one problem, dont know u guy have this problem or not..
I just install Big water SE, and going to overclock my CPU. My temp inside bios and mbm show me 51'c when using big water SE, but my reading temp thing show me 41'c. When i using the original heatsink, the temp inside and bios, mbm and reading temp thing show the same temp 51'c.

i already ajust many time for my temp sensor, but the temp still less 10'c, why going like that? which one temp is true? my sensor temp in good condition ( already tested )

Some of my friend said, abit motherboard temp need to -10'c , that just the true temp? izit this true? i dont know which one temp is true, i scare later my CPU overheat.... Later said bye bye for my CPU lor....

Pls help me to solve my problem... izit the bios problem? i already flash to D27.

Thx anyway....

guys whats the best bios for double sided KVR D43 rams in dual channel on an NF7-S rev2??

i'm using d26 manta rays xt can go up to FSB 230Mhz stable only,( DDR 460)...

^
That could also be your board. I also have D26 Mantarays XT 2T and all I can go is up to 225Mhz (with 2x512Mb DT-D43).

what hapen if system as my sig use 1T ?

any bad thing?

^
Higher performance, but not so high FSB.

even doublesided ram love 2T,,,, but also can use 1T if i want,,,?

coz the limitation of my barton 2500+ is 220*11 only at 1.8V and 3-3-3-11 2.8V

so i want try to use 1T coz i can't go for higher FSB anymore,,,,, heat kill my oc dieheart soul. damn......

This post has been edited by Mr_47: Aug 25 2005, 12:18 AM

my old bh5 cant get higher fsb with 2T...

252 @ 2-2-2-11, 1T is the highest and stable i could get but with 2T, 253 @ 2-2-2-11 will give errors in memtest#86.

3dfire 1t and mantarays xt 1t hang at 3dmark mother nature!

so going back to mantarays xt 2t

Want to ask u guyz. My mobo already with BIOS 2.7 (latest) but if i want to flash the modified (ver 10) cannot do it. It said the bios locked already. Can u help me?

This post has been edited by guy73: Aug 26 2005, 08:36 AM

guy73,

try tictac d26 xt or trats d27, those can get high fsb easily.

get it here
http://www.hwtweakers.net/postt4741.html

but which one ,,, too many d27 trats ?