mine is rev 1 set, they got giv extra AMD bracket, can use it to put rear exhaust . shud i lap my tuniq, but the thing is its HDT base, so still not sure....

Have u tried changing the TT extreme fan? I heard it wasn't really good
Maybe a higher CFM fan would do the trick?

yeah i did, bought a Gentle typhoon fan(on my siggy), but apperently the stock fan still perform better(GT fans are way more quiet thou), so i guess i need a fan with higher cfm fan(bought the GT fan coz it has only 57 cfm, but very high static pressure, surely higher thn my stock fan), now not sure whether shud i stick to my stock fan(after i plan to lap it) or get a new fan(noise wont be a factor coz i hav sumbea, rhebous fan controller )

my stock fan....
Bearing Type: Magnetic Fluid Dynamic Bearing
Rated Voltage: 12V DC
Rated Current: 0.26A (Max)
Air Flow: 90.65 CFM (Max)
Noise: 16~20 +/- 10%dBA
Speed: 1000~2000 RPM
Life: 50,000 hours
Thermal Resistance 0.092 (℃ / W)

shud i get either these 2 fans?
Scythe 120x25mm SlipStream SY1225SL12SH (1,900 rpm, 110 cfm, 37 dBA)
or
Scythe S-Flex SFF21G (1,900 rpm, 75 cfm, 35 dBA)
http://forum.lowyat.net/index.php?act=ST&f=54&t=1080565

all i noe the difference between these two fans are the bearings.

This post has been edited by selferino: Jul 15 2010, 11:42 PM

Oooooo i heard the slipstream are good, sayang they got no bling2 version of it

Change the stock fan of the TT extreme
Reviews said it is not 90.xx CFM as advertised

Put for casing fan better

yeah i noe, but i would rate it around 75 cfm or so, still better thn cm 90cfm fans i think, n also the new scythe GT fan i bought, btw when u ment casing fan, which fan ur talking bout?

---

Added on July 16, 2010, 12:05 amso u think i shud go for slipstream rather thn s-flex? who cares bout bling2, performace > bling2 for me now, unless im fom moscow

This post has been edited by selferino: Jul 16 2010, 12:05 AM

I meant by the stock TT Extreme's fan
Use it as casing fan

---

Added on July 16, 2010, 1:28 amOCZ Reapers currently running at 1066Mhz 5-5-5-15-20-2T at 2V, so far so good

This post has been edited by shinjite: Jul 16 2010, 01:28 AM

btw bro athlon n cloudwan, need ur help here, tolong!
http://forum.lowyat.net/topic/1491556
(spam2, hihihi)

Erkkkkkk is it that sooo hard to find meh? I never knew, i must have been lucky back then

an update from my fren... not impressive at all consderin 1600 lv can do d same or even better...

Eh only XMP profile meh? No BMP for AMD? Sayangnyer

yup bro, very2 few ram manufacturers offer amd binned sticks... lets see whether he managed to get ~1600 @ 6-7-6...

someone new here w/ his new toys...



This post has been edited by ah_khoo: Jul 16 2010, 12:58 PM

nice stuff you got there unker

that's not mine ok... dun get too excited...

waitin for d rightful owner to post d ss... i'll give him time until tonite or lastest 2ml...

You are too flatter on me which mean tonight I can't sleep early..

Try my best ya.. If finish pass u tomorrow at SLS, pm me ur number in vr.

meh... dun take it as pressure sir, it's more of a motivation...

even d sticks failed u, i believe u wont fail me. havin only a nite mite be gud enuf for u, but it takes me days or even weeks to tweak a pair of ram... me ish slow...

mite be goin to sls tomorrow, can't wait to use d flare sticks on my 690g board...

I will be there most probably before 1130pm.. By the time I SMS you im will be on my way from AMK to SLS..

DDR3 meh? U modified ur 690G mobo eh to make em fit eh? Hahahahaha
fuyooohhhh somebodi got chance to play2 with new rams la pulak..

sir, i supposed u mean 1130am rite? 1130pm there'll be another kind "customers" roamin around sls... those who receive pc parts made by papers...

got such thing one bro, if they can make sodimm to dimm converter, i'm sure i can find ddr3 to ddr2 converter in sls...

This post has been edited by ah_khoo: Jul 16 2010, 04:13 PM

Ops sorry Sir, its would be 1130am.

Today many typo errors..