voltage on SPD tab is not the ram voltage?

thats is d fix volt,d real voltage u better check at bios to get the more accurate volt..

The ht is abit high though. Did you isolate and test the ref clock with the ht and at which ref clock need to down the ht?

Its best to isolate each and test it. There are too many variable for you to identify the problem.

If you are going to run the ram at 2000mhz, you need to run in 1:4 divider. You can verify with other divider and might give you a boot issue.

This post has been edited by louislkw: Oct 3 2010, 01:49 PM

u mean down my ht???coz now i running 1589mhz..but my c3f jus can oc untill 1600..i try running 19++mhz but cant boot up..

---

Added on October 3, 2010, 4:17 pmlast time i use ocz reaper 1600mhz also dun hav such problem,now using gskill got tis problem..mayb still hav to play d timing??

This post has been edited by alan kc: Oct 3 2010, 04:17 PM

I saw it in your screenshot posted.

Did u run some test to check the ram? Or try different slot?

This post has been edited by louislkw: Oct 3 2010, 05:01 PM

i using pi mod test run 32m can finish...havent try other slot yet..

Oic

HAHA...bro,now strymix got wat promotion 1 mbps??

you can try higher ht link speed.

not yet bro, is there any diff? will try it out when i have d time, been abit occupied by d eco these few days...



2100 @ CAS8 anyone?



This post has been edited by ah_khoo: Oct 4 2010, 08:31 AM

Nice result. On what vDimm bro?

-pWs-

ram is decent but clock can't make it bro... a be chip is much needed as divider 1333 and below can't really run d ram > 1900... only divider 1600 can drive d ram @ high freq...

vdimm is 1.785v as per turbo-v...

This post has been edited by ah_khoo: Oct 3 2010, 11:14 PM

My FX5000 is unlocked and overclocked to 3.3Ghz stable. Vcore @ 1.4v on MSI 785 GTM-E45, RAM is 1gb x2 Kingston HyperX DDR2 800 @ 4-4-4-13, vdimm @ 2.0V. Currently utilised as HTPC @ living room. Cooled using TR XP120, modded the bracket to fit AM2 (original bracket is 478). ran intelburntest continuously 6 hours, stable.

This post has been edited by edministrator: Oct 4 2010, 07:27 AM

Not bad Not bad. Jealous of you guys still overclocking.

-pWs-

thx bro... was just bein lucky this time... i wish there are dual core thuban so that d chip is not overkilled for day to day tasks... usin x6 just for ram clockin is like usin a machine gun to kill an ant...

another quick run @ 2.2k...



This post has been edited by ah_khoo: Oct 4 2010, 08:18 AM

show some cpuz screen shoot and stress test results.

here u go, hot from the stove . will capture prime95 SS when free. this rig is running rock solid with CnQ enabled, impressive indeed.

if i m not mistaken, shinjite is also running on 3.3Ghz with this mobo & cpu.

This post has been edited by edministrator: Oct 4 2010, 07:33 AM


Attached thumbnail(s)

Hee.. 32M pls..

nice result there ah_khoo

next few days i can join u guys.. hopefully

u wanna see d ram catches fire ah sir?

mite try that as well so that they can turn itto a pair of flare...

meh, trcd @ 10 is lame... but even i put 2.0v wont help @ 2.1k, so it's pointless askin for impossible thing bein possible...

flare, ahsos & deneb/1090t on d way bro?

This post has been edited by ah_khoo: Oct 4 2010, 10:52 AM