i see. but the VID for your chips like abit high leh.
normal VID not 1.275v?

normal vid for this chip ranges from 1.3-1.4v, that much is confirmed. u can check out Mika's thread.

i see, this chips got various VID.

a quick prime session...

Woahh...2120 on eco...nicely done unker...

wish i have those s3x core + 890 mobo...

any way, please help me to update into database ya sir...

This post has been edited by verdict: Oct 6 2010, 09:10 AM

wah u guys so advance.. i don't have a chance to play around..
still using evo ar ah_khoo..

Be grateful of what u have bro, who knows later on u will be the 1st bulldozer user here

Thanks for replying bro.

Am using DDR2 1066MHz RAM, i have set it to 2.2V already.. not going to go any higher lol as the specs is 2.1V originally.. Am overclocking on an AM2+ motherboard..

highest OC is 3996MHz@1.380v that can load into Windows..
Higher than that cannot boot into windows but can POST normally/successfully. Heck I can even get to ~4.4GHz yesterday from BIOS but cannot boot into Windows XP. Feel like bashing the Windows already..

I tried upping the cpu volt & cpu-nb volts too.. it just stubborn don't want to boot into windows xp.. gah..

The main problem is cannot boot into Windows XP if my clockspeed is more than 4GHz.. I hope this is not one of the Windows XP limitation..

Any sifus, please advice

This post has been edited by suhuann: Oct 6 2010, 10:40 AM

Oooooh didn't notice ur using AM2+ mobo Please list out ur rig spec also ah
What's ur ram multiplier? Have u tried using smaller ram dividers to ensure that ur rams not the culprit in holding back ur oc?

This post has been edited by cloudwan: Oct 6 2010, 10:48 AM

Specs for my secondary rig :-
1.) MSI 785GTM-E45
2.) AMD Sempron 140 (Unlock to AMD Athlon II X2 4400e), cooled by Cocage MST-140 (Max temp during Prime95 is 45C, Idle 29C)
3.) Corsair Dominator 2x1GB 1066MHz DDR2

Anything else need to know?

My current RAM multiplier 1:1.66 sometimes 1:1.33, I try to keep my RAM MHz close to the specs. HTT and CPU-NB multiplier at x6, sometimes x5 if I go higher clockspeed.

I tried tighter RAM timings, cannot also. Tried looser RAM timings, cannot also.

My current max OC that CAN boot into Windows XP and do Prime 95 is as below :-
1.) 14 hours FSB@296x13.5, Default vcore after unlocking: 1.380
2.) 12 hours FSB@319x12.5, Default vcore after unlocking: 1.380

Thank you so much..

Bang oltromen...feel free to update the result into databse ya...many thanks mate...

Have tried running cpu-nb@IMC higher than 2000mhz? Maybe around 2.4ghz? Give ur vcore around 1.45v & cpu-nb core around 1.25v
If it still cannot then maybe its ur unlock core the culprit, it just cannot run that high, i face the same prob when i was using an unlocked 720BE

Huhuhuhu, nothing to update yet bro, since raya been on O/C mode off..

hmm, haven't tried 2.4GHz before, max i have done is 2.1GHz.. maybe I should try that..

vcore and cpu-nb voltage tried before..

If thats really the case, maybe thats the limit of the CPU unlock core then.. hahaha

Will let u know if it works out.. thanks!

d eco gonna go down d list as one of my greatest purchase, it seemed i had lotsa luck w/ ram if compared to chip (apart from x2 550 & x4 810).

dun be so disheartened bro, even a 770 board can clock elite 1600 madly, so u just need to keep tryin... ya pi sticks should be runnin on psc which is d same on these elite 1600... u need a thuban thou if u wanna play alot w ram.



*sos kari

meh... not gonna update these below par clocks...

ermm... it's not mine bro, it's my fren who is my neighbor as well...

yalor... diam2 ubi berisi... who know all of sudden bro 8tvt come out w/ bulldozer...

consider yaself lucky mate, my ex 140 unlocked til 3.3~3.4GHz only, wayyy lower than what ur achievin... even w/ decent batch of deneb 4GHz prime stable is not a gurantee. u need lotsa luck to get a golden chip to be able to run such clock for 24/7.

on a side note, try to balance out between clock speed, imc + ram freq. it's pointless to run ultra high clock speed but imc + ram freq @ stock (or somewhere near).

nie yg x patut, bli chiv + x6 but runnin @ stock... kasi goreng itu hardware ma...

This post has been edited by ah_khoo: Oct 6 2010, 01:33 PM

Erkkkkk, hahahahaha noted , sorry bro these few weeks just really not in the mood to do some oc'ing..

bagi kat ah khoo proc tu~

itu unker sudah retired tapi gila OC lagi~

shuann
u trying suicide 4ghz run eh. That migth be hard. Try disable mem channel interleaving if ur bios have it.. My regor wall around 3.6ghz 1.38v. I tried 1.65v, just bo0table.n0t primeable at all. U consider lucky.

@ sir Louislkw,

no sp32m as it keeps crashin, will u take cinebench for 2.2k?

the evo TD version is OOS in here edi i have to change to other mobo

1055t 95w will be available here in 2 or 3 weeks time.. might getting those..

either flare or adata xpg plus

what board would be then? chiv?

retail 95watter is available in 2 - 3 weeks time?

hold ya horses on xpg plus, those hyper aint doin very well from what i read in xs/i4mem...

This post has been edited by ah_khoo: Oct 7 2010, 01:06 AM