Wahhhh!!!

cant tahan anymore...ahhhh....

This post has been edited by verdict: Aug 14 2010, 06:25 PM

wah.. gd70.. looking forward from sanko koko's result

Tried the multiplier... moved it to 20x

Below is the Screen shot:

just buy liao phenom 2 925.....

i feel like i always stuck on 2.8ghz proc model

how come dont have, i donno.. u can ask selferino instead..
i just answering his question since i have no exp with that mobo..
if u used that mobo before.. u may guide him where is the cpu nb multi instead guiding how much cpu nb multi to use (since he not asking that + hes no noob)

anyone here have exp with d9chl?
having hard time tweaking this ram since it binned at 667mhz..higher divider wont boot..either my mobo or my modules or both combo not like other divider..
excuse me for asking about old fogoten ddr2..

---

Added on August 15, 2010, 2:24 ammind to tell me the price? last time i check the price, its weird.. too cheap and i assume it was a error.. (it was "last time" so i cant really remember which shop and how much)
some shop not list this proc anymore..

This post has been edited by kuntawakaw: Aug 15 2010, 02:24 AM

yup kinta ryte on tat, for now hav to wait for my fren to come bck b4 continue OCing his proc, did ask him to update bios, will see how later, btw all ahsos board has tat special software, turboV or sumtin, i now we can change volt n stuff using tat, but can i play wif clocks(HTT, cpu-nb n stuff) using the software, u noe, like Easy Tuner(ET) for gaygayboard?

---

Added on August 15, 2010, 7:25 amizzit stable mate?

This post has been edited by selferino: Aug 15 2010, 07:25 AM

Yup it's stable as there is no oc on ram and other components.
I see some others are going higher to 4.2Ghz for 24/7 use.

Screen shot on temperature after one night. It's still on stock cpu cooler as the WC kit has yet to arrive.

P/s: I am against prime.

sometime is ram ,sometime is mobo
my 10th anni wont clock over 800 if use 667 divider in DFI m2rsh

that was good.. since wont clock well with low divider..
me, wont clock well with higher divider .. no..it wont boot at all.
quite troublesome since i refrain myself to use GFX..htt oc will definitely will be a prob..

or perhaps update bios can solve ur problem?

bios from the official web is way too old.. i seek RH.. and use this current bios.
this is the latest bios at RH..and i cant even revert to any other older bioses since they wont unlock my sempron
so i stuck with this only

Screen shot 1090T at 4.2Ghz

so u dun prime, wut do u use do do ur stability testing mate?

Would do later when I get WC kit...
Btw how do crank NB to 3000Mhz? I cant get it boot @ 3000Mhz.
Now NB volt is 1.30v

just increase the NB multi

It wont boot after BIOS when I set to 14x or 15x. Did I miss something?
NB volt is 1.3v

try pump nb volt too

Hi xixo,
How much nb volt to pump?

Added on:
Pumped to 1.34v, still a no go at 14x for NB multiplier.

This post has been edited by ronaldjoe: Aug 15 2010, 02:57 PM

Pump CPU-NB Volt?

Sometimes it requires HTT + Multi combination for it work ..

first at all, what gc u use n the board name please.

set the limit at 1.4v.. suppose you should able to hit 3000nb