Hi xixo,
How much nb volt to pump?

Added on:
Pumped to 1.34v, still a no go at 14x for NB multiplier.

yup kinta ryte on tat, for now hav to wait for my fren to come bck b4 continue OCing his proc, did ask him to update bios, will see how later, btw all ahsos board has tat special software, turboV or sumtin, i now we can change volt n stuff using tat, but can i play wif clocks(HTT, cpu-nb n stuff) using the software, u noe, like Easy Tuner(ET) for gaygayboard?

---

Added on August 15, 2010, 7:25 am
izzit stable mate?

CPU-NB 2000 at 1.1v also can....

CPU-NB 2600 some needs 1.25v some needs up to 1.35v....

CPU-NB 2800 already in the 1.45v range....

CPU-NB 3000 already 1.475-1.55v range...

gudluck 

CPU-NB 2000 at 1.1v also can....

CPU-NB 2600 some needs 1.25v some needs up to 1.35v....

CPU-NB 2800 already in the 1.45v range....

CPU-NB 3000 already 1.475-1.55v range...

gudluck 

how come dont have, i donno.. u can ask selferino instead..
i just answering his question since i have no exp with that mobo..
if u used that mobo before.. u may guide him where is the cpu nb multi instead guiding how much cpu nb multi to use (since he not asking that + hes no noob)

anyone here have exp with d9chl?
having hard time tweaking this ram since it binned at 667mhz..higher divider wont boot..either my mobo or my modules or both combo not like other divider..
excuse me for asking about old fogoten ddr2..   

---

Added on August 15, 2010, 2:24 am
mind to tell me the price? last time i check the price, its weird.. too cheap and i assume it was a error.. (it was "last time" so i cant really remember which shop and how much)
some shop not list this proc anymore..

CPU-NB 2000 at 1.1v also can....

CPU-NB 2600 some needs 1.25v some needs up to 1.35v....

CPU-NB 2800 already in the 1.45v range....

CPU-NB 3000 already 1.475-1.55v range...

gudluck 

is it even stable? what you use for stability test?

of course wont crash if there is no load

Thank you. Able to get 2800 NB:

Dengzzzz... ok. I would run Prime when WC kit is installed.
I was running prime for a while just now.
Temp went up to 59c. I got to stop it as AMD recommend temp below 62c for the chip.
I don't want to BBQ my chip now.

Btw, Alankc is running 1055T AT 4.15Ghz. 4.1Ghz should be okay for 1090T.

See...i told ya aledi
1.5v for CPU-NB probably effect 2-3c increase in overall temp onie...(assuming CPU VID in stock volts)

last time when lazy, I just left the CPU clock to whatever frquency stable at stock VID (mine was just below 3.7ghz) juz pump CPU-NB voltage and push to 3000mhz stable with ram running at 1600 CL7....

PC felt snappier than 4.2Ghz 2600mhz CPU-NB....

hmmm... how bout 7-8-7 bro, how high u can go? u just need sometimes to know d behavior of d ram, after that, ur gud to go... glory glory united g31l ultra... 
since when? i'm just an old fart who sepam alot only... 

d thing with ram tweakin is it's timing consumin... i always do trial & error w/ windows based oc tool (for voltage adjustment & timing alteration). 
it depends on bios implementation, some can while some can't. 

Now it's running NB volt @ 1.32v (+0.02v) and NB vid @ 1.25v (+0.1v).
Yeah, it's snappier.

Dengzzzz... ok. I would run Prime when WC kit is installed.
I was running prime for a while just now.
Temp went up to 59c. I got to stop it as AMD recommend temp below 62c for the chip.
I don't want to BBQ my chip now.

Btw, Alankc is running 1055T AT 4.15Ghz. 4.1Ghz should be okay for 1090T.

If u really wan to extreme oc to ur pc,u need to take d risk..i oc until 4.15 ghz using volt 1.56v by enable d extreme ov and loadline calibration,i test prime it got 72 degree..haha..last time i oc my 955 i using 1.75v to stable at 4.05ghz.

emm without the load calibration, i wont be able to reach my speed though.....
overvolt doesnt matter much to me.........

Depends on how much it overvolts tho, i dread going above 1.5v, mau main oc tapi pengecot

apa la...no problem...even gaming wont stress proc 100% like prime did....

so no need takut2...2years warranty right amd?