Lagging even with 59ms average ping to lowyat.

Anyone in Tawau, Sabah have problem with high latency between 4k-5k and massive package loss? It have been 3 day since the problem started. I suspect it a local breakdown, since attempt to use vpn server located in KL yield the same result.


Local website such as lowyat.net as well as international one are taking forever to load, if it manage to load full content at all.

Slow action show how bad is Telekom Malaysia at handling the issue.

This post has been edited by peanjo: Jun 25 2010, 08:41 PM

guys, go get yourself broadband

u won't regret it

100x better than screamyx

no loss connections

no sudden internet down for few hours

no slo-mo loading

watching youtube is so so much enjoyable with broadband

no more waiting for hours just to download one song

no more waiting for days just to download one movie

broadband go go go!!!!

all i can say is heh in so many ways to that last post. In other news - the only thing affecting my side is a bit of lag in loading pages, and some slowness in direct downloads. Ftp hasn't really broken beyond 100kB/s but torrents are full speed as usual.

I am not experiencing any slowness but is just the Frequent Disconnections that is gettting on my nerve. The noise margin is going up and down... thought is router issue but tested with 2 router also same.

---

Added on June 25, 2010, 10:10 pmwhat talking you? you know streamyx is also broadband?

This post has been edited by selinix: Jun 25 2010, 10:10 PM

Same here in Sandakan.
f*** this government posting. I hate this place.

Streamyx is still ridiculous at night, they will never fix it.

I agree with you one day out of three days

Streamyx is also broadband

In fact, Streamyx is better than those 3G broadband for downloading

Were you using 9.6kbps all this while? Then congratulations... welcome to the broadband world, wherever yours is

i think my problem has been solved, hopefully

sabah/sarawak @ka east malaysia will get 5k ms to kl since they changing all the DSLAM box in some area that making slow connection to local server as i typing y ms to kl is now going up from 27 to 100ms and still going up. fakap TMs work also so slow.....

will get 5k ping... since changing dslam box (in some area) that are making slow connection??....

dont make sense at all.

why would changing a dslam box affect the entire state.

The gateway seems dead =.=

Ping to it using pingplotter seems to be 100% lost

cham cham cham
my connection slow already 3 days
esp connect to my favorite china websites
and problem havent solve yet
damn damn DAMN

1mb user
alor stuck
ip:60.5x.xx.xx

Sandakan ?
Normal here... 60.52 IP.

I noticed lots of ppl are having problems of low SNR and high attenuation especially around night time. I too had experienced these problems previously however mine happened during day time too then. So, I've decided to call TM, technician came and he said that the wire from the pole to my house was having problems. He cleaned up the wire and all was good till few weeks ago when I'm experiencing the same disconnection problems as you guys... line unstable during night time with high attenuation and low SNR.

I've decided to take the matter to my own hands as TM's response time is totally terrible (would take min 2 weeks for technician to come over to have a look). I went to check out the wires outside my house and noticed that the technician did not wrap the wires and just leave the copper wires bare naked enduring the weather thus oxidation did occur. During night time too, the wires would contract more due to it being exposed causing higher attenuation and lower SNR. I've then wrapped it up with some duct tape and everything is all good now. Hopefully this would help you guys who are experiencing the same problems as I did.

This post has been edited by fire_hoax: Jun 27 2010, 05:38 PM

ah nice dude u help a lot of people thumb up!

good advice!

53 years, yeah right...

I've done this before too, but what to do about the one on the actual pole? I'd love to see what botched connection they've done or redo it if it has got all crusty on the outside. I been getting these low SNR and high attenuation out of the blue just these past few weeks but suspiciously during the "maintenance" periods so I really can't really take out the possibility of each unless I check them individually.