sure can wan....no need FX or 3500 above...stick wif a decent proc and a good board theory....it will brig u far.....

yeah..the time will come..
have to work hard to collect money

money can come....processor+mobo can buy....but pure satisfaction only sendiri can achieve,...hehehehe...how???????.....try urself....

yup yup betul self satisfaction tu yang payah nak cari.

adn i have upgrade to amd64.. but s754 ler..

Allright, shall we stick to the topic..
Get ur winnie or whatever and start doing some OCing and post here..
Then any problem, we shall discussed it in detail..
With that i think we would have a better OC united here..
What do you say guys...

second to that...but my winnie is no go...stuck at 2.43g...
planning to get a venice or sandy...most probably venice due to short of budget...too many good offer here...furthermore my psu is 20-pin native...

guys, any of ur winnie work on temp below 31C?
it seems mine(CBBGD) hang if below 31C
izzit too cold that the electrons r freezing n cant move?
this happens when i on teh aircond, with my following rig setup

nop...never encountered b4....i've never came across any temp problem either wif stock HS or Hyper 6....

die die die. Ok try to the limit this is the last power it can make. cannot run in dual channel but with my bt-d43 can do superb in single channel. my proc will be in history if i push further.

try one more time 1st

This post has been edited by mazdagtr210: May 16 2005, 09:59 AM


Attached thumbnail(s)

lower the timing lor...say 2.5 4 4 8.....or if ur ram support 2.5 3 4 11 or 3 3 4 11

vdimm upto 3.0 to see best performance..

well 600mhz more is consider ok aledi in typical ok procs....

This post has been edited by antonio_zth: May 16 2005, 10:13 AM

ok will try again hehehehe. but all of u already change to 939 socket im still with 754. will change to venice core next month and try to goreng till hangus

yup of course below then 30 mine is 29 only but clawhammer sc754 lar

this is one thing i never seen b4...anybody seen a hangus amd64 b4?????

i have, it's mine

weiii jslut, how's the new palermo 3100+?

i only just installed it, but didn't have time to turn on yet

later tonite i'll boot it up and cross my fingers, hopefully nothing goes wrong

finally, i can boot at 9x300.. on devider ram at ddr 500~ 2.5-3-3-11 1T
but still cannot superPI n sandra mem-bench..
but teh strange thing is, i can do 3dmark w/o prob...
why aa?

yeah, its quite a strange problem..
Normally a system that fail PI couldnt even finished doing 3dmark..
Hmm, is there a possibility of corrupt software? nah since sandra mem bench is failing also..
I have a reason to believe if u keep the mem timing at loose, maybe it could pass PI and sandra mem-bench.. Btw, memtest stable?
Are you the one who got cold bug e-jump? Have u try different setup configurations..
I suggest lowering the RAM timing first..

yeps.. im teh one with winnie cold bug.. 31C n below hang summore..
2.5-3-3-x memtest ok at ddr490++ (assume it ok at ddr500 )
my winnie sure have strange behavior
btw, 9x300 was stable with 3dmark01