thanks anyway low yat82 ... I will be waiting for the link ....

Do some googling,theres million of those result

Heres a link:
http://www.jscustompcs.com/power_supply/

at last , can find it.. http://www.extreme.outervision.com/index.jsp

wanna ask u guys something, unsure it is a proper overclocking or not
to overclock my proc, i need to lower down my multiplier instead of leaving it at default right, I have tried lowering my multiplier to x8 but manage to shoot up the max 2.2ghz .. if i were using my default multipler 260 x9 = 2.34ghz, it can shoot up til 2.35ghz(current) ... so currently what I am doing is RAM overclock or processor overclock? By the way, I set to DDR333 from DDR400 then only manage to push up ... I just wondering why 260 HTT is the max i can go, when I go above, my sound distorted(not stable) ??

This post has been edited by patrickyeo21: Nov 6 2005, 11:11 PM

Hmm ... what do u mean? U r updating the rank? But, why the rank is similar as b4? Nobody update the rank ka?

Thanx.

he is incharge for s64 rank oni

ooo like that... S754 or S939? If S939, there is no changes oso..

Btw, anybody using MSI K8N NEO2 Platinum?

My temp is really wierd. idle = 40C but load suddenly it jumps to 50C @2.7GHz.
Anybody face this problems b4? 10C jump is really odd rite..
Is that becoz of HSF or Bios?

One more thing, why the voltage in bios and CPUZ or MBM is different? Normally in Bios is higher..

Thanx.

1 stupid question,

why does my sempre 2500+ can run at ddr400 when using my 4400 mushkin??

wa becoz ur sempron default htt is 200 ma, then default ram is setting is 1:1, sure ddr400 lo

opsss...typo error...

actually i wanted to say that i cannot run ddr400...everytime i tried alwiz become DDR333....

sorry for the misconfusion...

try manual set the ram tming n divider, n use 1 stick of ram if u r using 2... o ur vdimm voltage not enuf ar hehe

did it aledi...unable to run ddr400...arghhhh...

mebbe goin to change mobo lar...

wakakakaka wat mobo u use? rare problem wor... play with all the voltage n c c, worst come to worst change cheapo ram n try, then sure know wat problem edi

i doubt my rams,psu,cooling kit, failed me...it is either the board or the board itself....Its a Gigabyte K8NE....i'm gonna get me a DFI NF4X afterwards..

dats pretty normal mate, i faced dat w/ my nF3 Ultra-D too. idle bout 42'C, when primin reachin 55'C... dis is for vcore = 1.52 only (bios set), if any higher, primin near to 60'C, scary...

Mine like crazy one.. idle 40-41C, load 56-59C (almost 15C-19C jump)
Any solution? Change HSF? He he still waiting my NINJA from din.

i found out that double sided 512 cant be put togethjer to run due to cpu limitations.......thats why i can really run at ddr400...

i believe it's d onboard sensor thingy rather than d hsf itself. neway, ninja is a great hs, imo, should be betta than any tr hs available. d only thing i dun like bout it is d weight...

btw, some input needed from u guys. is fluctuation w/ d psu will cause primin fail?

@9*301
my vcore fluctuates between 1.456~1.472 (bios set = 1.52) when i do primin and it always failed within an hour.

@9*297
however when i set vcore = 1.45 in bios (windows show 1.408), no fluatuation shown and eveything goes pretty well so far.

do u guys think it's becoz of psu problem or nf3 thingy (can't do high htt), i'm a bit of confuse now...

First time posting in Overclockers United

Here's my entry for prime stable.



Athlon64 3000 Venice core running at 2.8Ghz aircooled with the Thermalright XP120 @ 1.475v
DFI Infinity mobo with 2x512mb DDR3200 Kingston D43's

nice oc there mate, stepping?