make it to 2.8-2.9....make some heatsink to ur ram...n u wil go higher

Guys, need to know your RAM reached 250fsb. Do you actually attached any heatsink to it ?

I suspect it cannot clock higher is due to the RAM is running 2T (when 4 sticks) and not so overclockable when it used 4pcs.

Anybody here is running 4 sticks of RAM and is able to clock more than 220Mhz ?

I know. The RAM specification was originally 2.5 V from DDR200 till 333.
Why isit that DDR400 needs 0.1V more? For stability purpose, since RAM behaves like capacitors.

i think ram chip wasn't that hot.......i always put my vdimm on 2.9v......

priming two sticks of BT-D43s at ddr520 2.5-4-3-5 1T @ 2.85V will try to see how long it will last.

This post has been edited by x800: Jul 21 2005, 05:06 PM

so means BT-D43 can OC more???

not really.... depends on da chip ... some DT maybe better and some not... it's all on ur lucks

Just test my dt-d43...only limit at 253 2.5-3-3-7 1T at 2.83 vdimm.....

using divider on rams do affect the overall performance or not?

hurm,i think i am a bit lucky with these rams.my old 512x2 bt-d43 only do 250 3-4-4-8 2T..

*update* i restarted prime.my rams did the same speed n timing after 7 hours 30 minutes



This post has been edited by x800: Jul 21 2005, 05:11 PM

lol! My Kingston Brand Hynix Chipset DT-D43 that I buy it from Singapore Bugis Sim Lim Square already 2 week, but I test it only can overclock to 237.8Mhz(DDR475) with CL 3-3-3-7~~~ What happen going on? Many people say that Hynix DT-D43 at least can up to 250Mhz(DDR500) with CL 3-4-4-8~~~

x-3-3-x and x-4-4-x got difference wan, the x-4-4-x one gets higher fsb

hurmm nice info... ..loosing the timing summore....how much overall differences fsb can go by changing to x-4-4-x?....

is it good to reach high fsb with loose timing or so-so fsb with thight timing?...anybody care to answear..

lol, My DT-D43 set 3-4-4-8 @ 2.8v 250Mhz(DDR500) langsung can't access Windows! @.@ When access Windows, PC will automatic restart...

hurm..

D43 can do DDR 500 @ x-4-4-3 quite easily..

sthing wrong with the bios setting maybe ?

Depends on the amount of increased fsb u can get with x44x compared to x33x. Usually x33x's fsb and timings are optimal

i think i'm gonna stick with 2.5-3-3-7 setting with 270 fsb (divider 9/10) with the ram on 243mhz....

got overall good scores using everest home on this one setting...

can go to 281 fsb with the divider (ram 253mhz) but my winnie need more vcore to feed on...below that 1.71v oledi unstable..


This post has been edited by moderno: Jul 14 2005, 01:46 AM

Limit only at 290Mhz but no stable, so I down to 285Mhz, DT-D43 run at 233.6Mhz (DDR467) @ 3-4-4-8 @ 2T @ 2.8v

See Pinture...

Just to say, those looking for DT-D43s don't search for Kingston KVR. They're now using PTC or something like that. Try Apacer. All the modules from Apacer in Cycom were Hynix DT-D43s, not one Kingston had it though.

Please refrain from asking about prices. You may get better answer here:

http://www.lowyat.net/v2/

or here:

http://forum.lowyat.net/index.php?act=SF&s=&f=7

using 512MB CT D43 and 512MB BT D43 on my NF2 platform...NF7-S BIOS merlin 27...cant go pass 210FSB..timing 2.5-3-3-11

Vcore=1.79V
vdimm =2.8V
vdd=1.7V

NF2 really dun like double sided chip