my old BT-D43 maxed at 255mhz@3-4-4-8 2.85Vdimm wif a P4 2.4C running dual channel..but wif a 3.0E,can only do the same speed/timing/vdimm on single channel..dual channel is only stable at 245mhz..sheesh

This post has been edited by x800: Jun 27 2005, 07:34 PM

*update~*
still testing, wish can go more than that ..



This post has been edited by ahpaul82: Jun 28 2005, 01:43 PM

wanna ask how maximum fsb can be pushed for hynix dt-d43?...

mine can only pushed to only to fsb 250 2.5-4-4-7 vdimm at 2.83v...higher than already unstable lor...

ahpaul82, do u put ur sandra benchmark at the ram benchmark collection there?

do BT-D43 need active cooling in order for it to clock higher speed?

bought another 512mbx2 KVR DT-D43 at MyPC last few days..

currently burning in at 2-2-2 @ 200mhz @ 2.7 vdimm

hearing that wanna my make tangan gatal to do the same lor...huhu...btw...have u try maximum fsb this dt-d43 can go with 2-2-2 @ 200mhz on dfi mobo? how much?

more test results..

11-2-2-2 @ 200 mhz @ 2.7 vdimm

Memtest - Test 5 = Stable 3 Hours

2.8 - 3.0 vdimm = Memtest Error

wh.. how come lower vdim is stable, and higher vdimm is not? i tot it's the other way round?


currently using bt-d43 2x512 @ 245mhz @ 2.9v. still got minor artifacts when playing 3d games (100% confirm not fm video card)

my DT-D43 doesnt like voltage..

as simple as that..

oh... never thouthg of that. usualyy it's the other way round. carnk up the juice and they'll run like hell

nope,
even the DT-D43 can clock high,
but it got very low point in sandra memory bandwidth benchmark,
the bandwidth efficiency only 8x% ..
i wonder why ...

all testing running 1:1 ratio.

To dinster :
good result there !
keep on going !

may i ask..the ram timing 2-2-2 11 ....wat is the function for last timing, mean the 11...

ya m b43 oso scored 83% efficiancy nia...compared 2 my fren's bh5 twinX got 9x% ...

Hynix RAM does not go quite well with nForce4 platform

it will fly on Intel or nForce2.

my dt can only fly 250 fsb 2.5-3-3-7 on dfi ultra-d..huhuhu...by prime kong after 3 hours...uhuk uhuk..

disagree..

lots of people with NF4 + D43 combination have good OC..

ahpaul82, moderno, etc etc

huhu now burning at fsb 253 2.5-3-3-7 1:1 1T...um nyum nyum....

just follow ahpaul setting....

btw?...is there any real performance differences between running divider and not?...i just checked my everest result :

270 / 243 : 2.43Ghz (9/10 divider) 2.5-3-3-7, vcore 1.58 --> memory write : 6889

and

253 : 2.277 Ghz (1:1 no divider) 2.5-3-3-7, vcore 1.4 --> memory write :6448

didn't try other benchmark yet...

so what do u guys says?....which setting should i stick to ek? ...using 180mhz + divider 9/10 or 200mhz no divider?...

This post has been edited by moderno: Jul 11 2005, 10:46 AM

How come my D43 512MBx4 cannot even reached 221Mhz at 2.5-3-3-7 2.7V ?

four sticks of ram, u need MORE vdimm.

vdimm ? The RAM specification is 2.60V.
PSU has been upgraded to Enermax 470W.