my previous BT-D43 can do dual channel (2x256) 260mhz, 2.5-4-4-11-1T prime stable, on nForce2. memtest stable up to 265mhz. all using 2.9vdimm.

forgot whom did i sold to last time.... 

D43 chipsets can't do 2-2-2-x 1
Mostly at 200Mhz is 2-3-3-5

so means BT-D43 can OC more???

stFu!

when oc sometimes we will check up the cable/hardware or stuff in our pc!

touch here and there to make sure everything was fine.

there is the connection,,,,,, if u don't know something to say other then just damn pwn other ppl idea i suggest u STFFFU!

now my ram can hit max 236mhz stable. dunno add some ramsink and a fan will make it hit higher speed????
but if i use ramsink, and i plan to put 4x 256MB on my new rig. dunno can fit or not ler?

memtest ( dos version ) just let it run all night, but modify the timing from memtest ( advance option--> change all ).  StarNet, my proc is XP-M ( default 133Mhz), dun wan to oc the proc while burn in, just want to burn the mem, not the proc. . but if u wan sshot showing 1:1, 2-2-2-11, can give oso. i've just tried it.

actually tis is how i do it,

set the vdimm to the lowest, set the timing to the lowest can boot to dos, no need to set to boot to windows, configure memtest advanced option--->change all, set 2-2-2-2. After 9 hours, tis is the result. default my BT-D43 is cl3. Now can boot to windows at cl2, oledi very happy. Gonna push the fsb tonite, how much it can do on 2-2-2-X.

sshot on 1:1

d43's and bh-5s are absolubtly different chips
bh-5 runs well above 3.1V
Would you try 3.1V on TCCD and UCCC