Hynix RAM Discussion
|
|
 May 24 2005, 04:33 PM
Return to original view | Post
#1
|
 
Junior Member
271 posts Joined: Sep 2004  
|
QUOTE(ychwang @ Apr 7 2005, 12:32 AM) normally DT43 can run 250mhz at least. Try straight go to 250mhz with loose timing first, then slowly try to tighten it. What is your suggestion of the loose timing value ? Need to boost the vdimm ? |
|
|
|
|
|
Jun 24 2005, 10:46 PM
Return to original view | Post
#2
|
|
Junior Member
271 posts Joined: Sep 2004
|
QUOTE(dinster @ Jun 24 2005, 09:43 PM) bought these at MyPC today.. paid RM 340 for 2 sticks... Dinster, I had this RAM but is on week 18. I'm using 4 pcs 512MB for Venice 3200+. I manage to reached 220Mhz only. Hei, my I know what voltage you use for the RAM ?Kingston VR PC3200 Vdimm = 2.85 will definitely try higher HTT / better timings..    |
|
|
Jun 25 2005, 09:21 AM
Return to original view | Post
#3
|
|
Junior Member
271 posts Joined: Sep 2004
|
QUOTE(dinster @ Jun 24 2005, 11:05 PM) Memtest Stable (Test 5) stable for 30 mins.. tak sempat nak buat lama.. now at my hometown already..  btw there's no more DT-D43 at MyPC.. i bought the last pair..  BT-D43 = lots of them...... already stated lerr.. 2.85 Vdimm..  wanted to give more vdimm but that's max already.. (MSI Neo2 Plat) Besides changing the RAM settings. Do you change other settings like HTT, etc.... ? |
|
|
Jun 25 2005, 01:03 PM
Return to original view | Post
#4
|
|
Junior Member
271 posts Joined: Sep 2004
|
QUOTE(dinster @ Jun 25 2005, 12:53 PM) what do u mean by other settings ? I'm using DFI NF4 Ultra-D. Not sure what to set inorder to get 250Mhz for the RAM.if u're using Neo2 Plat, there's not much settings in there.. HTT = 250 mhz HT Freq = 4x vdimm = 2.85 Cool N Quite = Disabled what else eh ?  |
|
|
Jul 11 2005, 12:02 PM
Return to original view | Post
#5
|
|
Junior Member
271 posts Joined: Sep 2004
|
How come my D43 512MBx4 cannot even reached 221Mhz at 2.5-3-3-7 2.7V ?
|
|
|
Jul 11 2005, 02:15 PM
Return to original view | Post
#6
|
|
Junior Member
271 posts Joined: Sep 2004
|
QUOTE(ceo684 @ Jul 11 2005, 01:14 PM) four sticks of ram, u need MORE vdimm. vdimm ? The RAM specification is 2.60V.PSU has been upgraded to Enermax 470W. |
|
|
Jul 11 2005, 03:29 PM
Return to original view | Post
#7
|
|
Junior Member
271 posts Joined: Sep 2004
|
QUOTE(kelvin_hata @ Jul 11 2005, 03:01 PM) make it to 2.8-2.9....make some heatsink to ur ram...n u wil go higher Guys, need to know your RAM reached 250fsb. Do you actually attached any heatsink to it ? I suspect it cannot clock higher is due to the RAM is running 2T (when 4 sticks) and not so overclockable when it used 4pcs. Anybody here is running 4 sticks of RAM and is able to clock more than 220Mhz ? |
| Change to: |  0.0231sec
 0.75
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 09:01 PM |
Quote