dinster, those sets of RAM are definetely from good batches. Wow, I think I should get a set of DTD-43, Btw, I always had good experience with stuffs from MyPC. Seems like they handpicked some of those stuffs. How it fares in Memtest anyway?

Dinster, I had this RAM but is on week 18. I'm using 4 pcs 512MB for Venice 3200+. I manage to reached 220Mhz only. Hei, my I know what voltage you use for the RAM ?

Memtest Stable (Test 5) stable for 30 mins..

tak sempat nak buat lama.. now at my hometown already..

btw there's no more DT-D43 at MyPC..

i bought the last pair..

BT-D43 = lots of them......

already stated lerr.. 2.85 Vdimm..

wanted to give more vdimm but that's max already.. (MSI Neo2 Plat)

This post has been edited by dinster: Jun 24 2005, 11:05 PM

hehe din... booster satu mari lor.. hahaa.. then got more volts

hehe.. dinster.. you should thank you me

ok, i bought this DT-D43 long time ago .. My KINGSTON 2x512MB DT-D43 (double-sided) in action

test bed :
Processor : AMD64 3000+ Winchester, (250x9) default voltage.
Mobo : DFI NF4-DAGF (BIOS 414)
RAM : Kingston 2X512MB DDR400 DT-D43 (double-sided) Vdimm : 2.85v , 1T (actualy i forgot is use 2.8v or 2.9v already.. )


sorry for the pic, don't know why cannot upload to LY.NET

My advise : useless to apply more than 3.0v voltage to DT-D43.
not trust me ? go try and see

able to push to 260MHz with same timing and voltage, memtest#5 passed at least 5hours, but got error in memtest#8

more than 2.9v memtest#5 got errors.

this is the Everest Memory Lantecy when i was doing 260MHz 2.5-3-3-7, 1T, 2.85v
prime failed after 1hour



early conclusion for my DT-D43 :
I think the tight timing and high MHz for the DT-D43 is around 250~260.

great OC paul..

nice meeting u..

I waiting to see your result oh ~
hope you enjoy with it ~

Dinster,
Besides changing the RAM settings. Do you change other settings like HTT, etc.... ?

what do u mean by other settings ?

if u're using Neo2 Plat, there's not much settings in there..

HTT = 250 mhz
HT Freq = 4x
vdimm = 2.85
Cool N Quite = Disabled

what else eh ?

I'm using DFI NF4 Ultra-D. Not sure what to set inorder to get 250Mhz for the RAM.

perhaps u can ask people here..

http://forum.lowyat.net/index.php?showtopic=135000

DFI's bios is quite complicated (for PRO users)

dfi + hynix got some compatibility problem

@ ahpaul82
heh.. different modules perform differently.. u think all venice can hit 3ghz? no right? all TCCD can do 300mhz? no right? not that we don't trust u.. but with more volts they can go quite high on the modules i've seen

yes .. finally got 280Mhz super pi 1M stable on my bt-d43 KVR on DFI LP NF3 250GB



Attached thumbnail(s)

eiiii.... damn good

wow...incredible

hehehe...
maybe need more 'training' gua ..
hopefully can hit 270MHz with tight tming lor
wish me luck
i saw someone can do 300MHz before , 3-3-3-8..

my clock at 255mhz winchester 1800+ s939
HT @ 4x ..
using hynix bt-d43 512x2 @ 3-3-3-7 vdimm 2.8(max volt for my mobo)

consider ok or sucks???if i push 260mhz the system is very unstable..
newbie here...

hey DT-D43 users.. push till 270 lar..
u guys can feed em with more volts, unlike me

Mine even worse lar, DT-D43 only 242Mhz@3-3-3-8 Vdimm=2.85