i cannot find kingston wit Hynix DT-D43 chip oredi
its using different chip now

Correction...double sided and dual channel. If single channel not much difficulty. Mine I was fortunate to have a good stick of BT-D43's that can push 250Mhz at 2.8v 2.5/3/3/11 timings

my KVR....nice....miss em though...

the best i could do is 200mhz 2-2-2-11 on nf2, the ram owned by my fren zamree7
the test bed is Asus a7n8x-e deluxe. 512mbx2 DT-D43

yep the one using dtd43 is for short period oni. lucky me get 1 pair of it.

hehe...now it's flying on my nf4 ultra 243fsb at 2.5-3-3-7..... the highest can go is 259fsb 3-3-3-7..

Wait, wait, wait. NF2 does NOT like dual channel AND double sided?

What I mean was both using double sided chips and also using dual channels. Not saying that both situations are bad for nF2. Hope that clears things up when it comes to OC'ing the slowly being pushed back platform

really?

Try doing it to the new UTT BH5's. Then you'll understand why. You'd be sweating bricks trying to pull decent speeds beyond PC3200

i just bought 2x 1gb patriot pc3200 with hynix bt d43 chipset... just testing running it at 237 fsb so far no problem.. hopefully can reach 250fsb.. hehe

I think u posted the wrong screenie? It's running below 200Mhz, nothing's great there or am I wrong?

its the high fsb i'm showing...not the ram speed....

tried pushing my dt's to 300fsb with the divider 5/6 @250Mhz...but oledi cannot boot up into windows...uhuk uhuk...

btw...how much vcore u fed on the procs to make it boot into windows bro antonio?

hihihihi....rahsia la adik moderno....free stacker II then i trade wif the tips and tricks....hehehehe.....

weh...ko sebaya ngan aku la....hahahah

but if u've setting that can make it 2.7Ghz stable on winnie...hehe...can trade it with the stacker II....FOC summore.... ...hahaha

It's true that nForce2 dislikes double sided chip && dual channel like what almostthere said, well at least for me too. I have 2 double sided DDR400 DT-D43 and i can't run them at 200FSB on my ASUS A7N8X-E Deluxe on dual channel, default timings. I might be able to obtain better FSB if i were to not run them in dual channel mode but the thing is, i can't find a way to disable it.

Yup, it's a well known fact that nForce2 motherboard "dislikes" 512modules which has 16chips(double sided) to run on dual channel.

not in may case!

see my sig

can go up to 230 fsb but high temp 60+ keep hold me down at 220 only(tem max 57)

BTW: my dream is,,,,,,,, a very damn cool country! DAMN COOL ONE

This post has been edited by Mr_47: Aug 5 2005, 02:43 AM

230mhz is nothing especially if running in 2T mode, nForce2 usually still tolerates double sided RAM up to 240mhz

u're running 1T or 2T?

with 2T you can go up to 245mhz easily

This post has been edited by soulfly: Aug 6 2005, 05:27 PM

just back from Penang PC fair.
i saw lotsa KVR come with DT D43 chips.