DFI nF3/4 series (LP and Infinity) users come in, Overclocking ability and troubleshooting
|
|
 May 27 2006, 09:46 PM
|
 
All Stars
10,688 posts Joined: Jan 2005 
|
QUOTE(gsan @ May 27 2006, 09:35 PM) woow, 1.42v only update 4 ur info. my RAMs cant do 300HTT even at 5:6 divider. i think that is the max for cheapop BT-D43 can do. i pass the 32mb calculation but when i put 300HTT even at 1.55vcore, my system cant boot, probably by my RAMs. so, unofficially current highest attempt was 2.9Ghz@ 1.42vcore.    how bout urs?? mind to share  |
|
|
|
|
|
May 27 2006, 11:08 PM
|
Senior Member
2,471 posts Joined: Jan 2003 
|
QUOTE(gengstapo @ May 27 2006, 09:46 PM) update 4 ur info. my RAMs cant do 300HTT even at 5:6 divider. i think that is the max for cheapop BT-D43 can do. i pass the 32mb calculation but when i put 300HTT even at 1.55vcore, my system cant boot, probably by my RAMs. so, unofficially current highest attempt was 2.9Ghz@ 1.42vcore. mine is bad... 2.9GHz need 1.54v to prime stable and yes, now still priming. how bout urs?? mind to share  |
|
|
May 27 2006, 11:46 PM
|
Store Representative
679 posts Joined: Jan 2003 From: PG/KL/CYBERJAYA 
|
at least u all may do 275 above.
|
|
|
May 28 2006, 02:40 AM
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(gsan @ May 27 2006, 09:49 AM) bro, kinda high bro, xp90c w/ DELTA vs f64? some more all my case fans are in low speed (1.2K RPM > cm bling2 led fan), i'm allergic to noise, unlike u & Westley... mine now priming at 2.8G @ 1.43v in bios reading or 1.42v in DMM reading, using xp90c pair with 92mm fan @ 2.2krpm, 38~39'c QUOTE(Westley @ May 27 2006, 11:32 AM) u wanna try out freezer64pro? try dun want, free welcome...  QUOTE(gengstapo @ May 27 2006, 09:46 PM) update 4 ur info. my RAMs cant do 300HTT even at 5:6 divider. i think that is the max for cheapop BT-D43 can do. i pass the 32mb calculation but when i put 300HTT even at 1.55vcore, my system cant boot, probably by my RAMs. so, unofficially current highest attempt was 2.9Ghz@ 1.42vcore. bro, u mean u can run d43 on lp board w/ 1t? how bout urs?? mind to share  |
|
|
May 28 2006, 03:40 AM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(gsan @ May 27 2006, 11:08 PM) mine is bad... 2.9GHz need 1.54v to prime stable and yes, now still priming. ic.. mebe need more tweaking & bun-in  QUOTE(Westley @ May 27 2006, 11:46 PM) at least u all may do 275 above. yeahh. opty family was superb  QUOTE(ah_khoo @ May 28 2006, 02:40 AM) bro, u mean u can run d43 on lp board w/ 1t? err.. i guest so. is there any prob runnin' hynix chippy on LP board?? Attached thumbnail(s) 
|
|
|
May 28 2006, 04:33 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(gengstapo @ May 28 2006, 03:40 AM) ic.. mebe need more tweaking & bun-in thx for d clarification bro, heard dat lp boards dislike hynix chippy, dats y i opted for utt, who knows my pair of utt not doin well... yeahh. opty family was superb err.. i guest so. is there any prob runnin' hynix chippy on LP board??  am2 is around d corner, hopefully afta it's launched i can get myslf a DC opty... more core more fun... |
|
|
|
|
|
May 28 2006, 04:43 AM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(ah_khoo @ May 28 2006, 04:33 AM) thx for d clarification bro, heard dat lp boards dislike hynix chippy, dats y i opted for utt, who knows my pair of utt not doin well... hehee.. no sweat. regarding the AM2 processor, have they arrive to local market yet? am2 is around d corner, hopefully afta it's launched i can get myslf a DC opty... more core more fun... ps : im not going to move(AM2) near future until finish messing-up wif my opty This post has been edited by gengstapo: May 28 2006, 04:45 AM |
|
|
May 28 2006, 09:05 AM
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(ah_khoo @ May 28 2006, 02:40 AM) bro, xp90c w/ DELTA vs f64? some more all my case fans are in low speed (1.2K RPM > cm bling2 led fan), i'm allergic to noise, unlike u & Westley... haha, that's not delta fan bro, somemore running at 2.2krpm is quiet enough, even the psu fan is louder than it QUOTE(ah_khoo @ May 28 2006, 04:33 AM) thx for d clarification bro, heard dat lp boards dislike hynix chippy, dats y i opted for utt, who knows my pair of utt not doin well... still got 2 sticks of 512MB KHX Bh5 in lyn, 2 sticks of 512MB CMX Bh5 & 1 stick of 512MB CMX Bh6 in lelong. Go grab one pair |
|
|
May 28 2006, 10:35 PM
|
Senior Member
1,895 posts Joined: Jan 2003 From: Shah Alam
|
guys i have a prob here.. It seems that whenever i turned off the wall plug switch to my pc and turn it on , the bios will give a warning and stated that it's in safe mode. it ask me 2 like reconfigure the cmos setting. My settings all were reverb 2 default setting. This doesn't happen if i just left the wall switch on when i shut down my pc.
Another thing is, now i can't o/c my opteron to 255 fsb which i always do. My pc will hang during start-up. I can't even reach 240 fsb without getting hang. I suspect that my mobo's batt. causes the prob. any1 can help? pls..thx |
|
|
May 28 2006, 10:53 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(SHOfrE3zE @ May 28 2006, 10:35 PM) guys i have a prob here.. It seems that whenever i turned off the wall plug switch to my pc and turn it on , the bios will give a warning and stated that it's in safe mode. it ask me 2 like reconfigure the cmos setting. My settings all were reverb 2 default setting. This doesn't happen if i just left the wall switch on when i shut down my pc. mebe ur battery CMOS weak ady.. Another thing is, now i can't o/c my opteron to 255 fsb which i always do. My pc will hang during start-up. I can't even reach 240 fsb without getting hang. I suspect that my mobo's batt. causes the prob. any1 can help? pls..thx |
|
|
May 28 2006, 11:12 PM
|
|
Senior Member
1,895 posts Joined: Jan 2003 From: Shah Alam
|
^ i hope so.. it's better than getting my cpu or mobo spoilt..
btw, does weak battery really effect my o/c potential? |
|
|
May 28 2006, 11:16 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(SHOfrE3zE @ May 28 2006, 11:12 PM) ^ i hope so.. it's better than getting my cpu or mobo spoilt.. sure laa. low batt will reset all ur BIOS setup when ever u turn-off. so, ur OC setting need to be re-configure btw, does weak battery really effect my o/c potential?  |
|
|
May 29 2006, 12:02 AM
|
Senior Member
825 posts Joined: Jan 2003 From: Ipoh
|
This is what I have after some tweaking....
1.) 280HTT x 9 with divider 100Mhz 2.) 240HTT x 9 with divider 200Mhz Which one is better for gaming? HF2 Source. BF2... This post has been edited by hellwaker: May 29 2006, 12:03 AM |
|
|
|
|
|
May 29 2006, 12:12 AM
|
|
Senior Member
1,895 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(gengstapo @ May 28 2006, 11:16 PM) sure laa. low batt will reset all ur BIOS setup when ever u turn-off. so, ur OC setting need to be re-configure i know, what i mean is does it effect that i can't o/c my fsb as high as i usually do.. i know it'll get resetted but y can't i get higher fsb? |
|
|
May 29 2006, 06:46 PM
|
Senior Member
2,095 posts Joined: Oct 2005 From: 2�18' | 102�23'
|
QUOTE(hellwaker @ May 29 2006, 12:02 AM) This is what I have after some tweaking.... i think if ur ram 1G+, u can go to 100MHz divider......1.) 280HTT x 9 with divider 100Mhz 2.) 240HTT x 9 with divider 200Mhz Which one is better for gaming? HF2 Source. BF2... but try to make it 133Mhz or 166Mhz for best result.....  |
|
|
May 29 2006, 07:04 PM
|
|
Senior Member
825 posts Joined: Jan 2003 From: Ipoh
|
QUOTE(2uk3y @ May 29 2006, 06:46 PM) i think if ur ram 1G+, u can go to 100MHz divider...... Yes I have 2 x 512. I think I still can squeese some juice out if put 100MHz.but try to make it 133Mhz or 166Mhz for best result..... |
|
|
May 30 2006, 01:56 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(hellwaker @ May 29 2006, 12:02 AM) This is what I have after some tweaking.... both oso can use larr but then, depend which u think nice when running all of ur daily task.. 1.) 280HTT x 9 with divider 100Mhz 2.) 240HTT x 9 with divider 200Mhz Which one is better for gaming? HF2 Source. BF2... |
|
|
May 31 2006, 06:45 PM
|
Senior Member
968 posts Joined: Dec 2004 From: Papar/K.Kinabalu 
|
hello,
my gaming rig not up yet. is there any good bios for my mobo to run with my opteron 144. anyone can recommend |
|
|
Jun 1 2006, 12:04 AM
|
Senior Member
3,159 posts Joined: Dec 2004 From: >Taiping,Perak< 
|
QUOTE(rzonealley @ May 31 2006, 06:45 PM) hello, Official bios?my gaming rig not up yet. is there any good bios for my mobo to run with my opteron 144. anyone can recommend Big toe moded bios? |
|
|
Jun 1 2006, 12:12 AM
|
Junior Member
22 posts Joined: Mar 2006 From: Penang
|
hi all, any 1 using 146 with water cooling? mind to share ur temp. with me?
mine got 48C full prime @ 2.8Ghz @ 1.4V @ air cond room 20C @ 24C water temp i got : Thermaltake water block, swiftect 12cm x 12cm radiator, 1000l/h pump. any idea to improve it? or any nice wter block introduce? This post has been edited by johnny_loo: Jun 1 2006, 12:13 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0283sec
 0.33
 6 queries
 GZIP Disabled
Time is now: 8th December 2025 - 10:39 AM |
Quote