nolah wat i mean is how to measure amd64 clock. in athlon xp simple only juz fsb x mutiplier. but in amd64, setting inside bios make me blur

HTT is similiar FSB? they can adjustable from 1x to 5x right? multiplier in amd64 is block to upper but lower is ok right? PCIE speed how to set? wat is the default? currently my card only run in 8x mode. i m using nf4 sli w single card.

hello, noob question here...

how far can my rig go? let's say, can i oc the proc to 2.2ghz using only the stock cooling? i'm still learning how to overclock my proc..

400mhz shouldn't be hard for 3000+ Venice..

check the stickies for overclocking tips before trying anything urself

anyone knows the differences between the NF4 DAGF/Infinity and the Ultra Infinity?
vdimm and stuff?

Im using DFI NF4 DAGF.
actualy this board DAGF = Infinity .
just different name only. even the BIOS also same.

The HTT bus (CPU frequency) is adjustable from 200MHz up to a whooping 450MHz. Concerning the voltages,
you can set the CPU voltage +0.45V over stock, making it 1.85V max for a Venice core for example. The chipset voltage is also adjustable, up to 1.7V.
The RAM voltage can be adjusted up to 3.2V in 0.1V steps also. there have plenty DRAM configuration too.

yyeah i know the DAGF = Infinity
i meant comparing those with the Ultra Infinity (with the NF4 Ultra chipset)

not sure which to get yet
selling your DAGF?

If you want Value not the UV type then go for Ultra Infinity lor .
i think the Ultra Infinity also not bad in OC.
plus, worth to buy also, got SATA2, IEEE etc.

Anyway,MSI K8N SLI only sell at RM535
if you planning to run SLi in future better get this one

you interested to my baord ?
I will wait until Dec only decide which board to buy,
im sure that time can get a GOOD board with CHEAP price

do u think there'll be any difference in OCing between the Ultra and the DAGF?
since i wont be using the SATA2 or IEEE anyway

haha, cant wait till december man

nah, wont be using SLI either

there will be difference.. but i don't think the difference is much..

the huge difference comes when u want to clock BH-5 modules as the DAGF does not allow more than 3.2v for memory

anyone running pdp patriot ddr400 pc3200 xblk on dfi ultra-d?
hope that someone with the ram can share his/her experience with it

thanks

ahh, okie so it'll be the DAGF for me

any idea how much it costs in lyp?

if i'm not mistaken, rm3xx, sumwhere near d rm400 region. Ask dinster, i think he get his in lyp.

btw guys, is nf3 ultra user allowed to join this thread?

Should be around RM380++

i bought my DAGF for only RM 365 last month

wat is DAGF?

DAGF is using NF4 chipset if i'm not mistaken...
and PCB design is same as Infinity Nf4U...

What's PWM AREA ? mine gets very very hot !

mosfets.. the ones with the silver heatsink on the side of the CPU socket area

Normal for you cause you're on water.

just direct a fan over that area and it should be fine..

and jesus.. u have a nice rig there drooool