hi, p4 pair with 6670 fine?

it will be quite a bottleneck, coz as mentioned in previous posts, even with gt210 also got some bottleneck.

it'll work, but you will not be able to have the best performance from the 6670 when you play games, coz it's limited by the processor.

with 6670 in PCI-E? The card will be in serious bottleneck with P4 processor.Not really recommended.

recently my PC keep BSOD for no reason

checking event viewer never provide any information

my current RAM is

2 sticks, each 1GB Qimonda & Kingston DDR 400

when I run PRIME95 with both sticks, it runs into errors in a few minutes, sometimes a few hours.

when I run PRIME95 on just 1 stick, it runs no errors for about 8-12 hours This is with the QIMONDA stick.

Technically I can say either the DIMM slot is busted or the KINGSTON 1GB is busted.

Few questions :

Can I get warranty for this Kingston?
What other softwares can test hardware component failures other than PRIME95, which I use to previously benchmark

currently no overclocking involved and PC specs are per below in signature

help?

How about using Memtest?

Try memtest86

totally forgotten about memtest

laptop = better work
xbox = better gaming
mobile device = everything on the go

ok will give that a go

thanks

this post is for p4 users ?

As the title says, yes for P4 users

Finally I'm letting go my retired rig after more than 5 years. It had been serving me very good. The P4 will always going strong despite the technology is advancing.


OT: If anyone is interested on the parts I'm selling, do drop me an offer. The thread is as below:-
http://forum.lowyat.net/topic/2006095

Abit AI7....legendary

Yeah, this board is superb. But I had it lying in the box for almost more than 8 months. Since I no longer using it, might as well sell it to someone that will fully utilize this motherboard.

nice!

few days late, damn it :D

anyways ive not been able to test MEMTEST because :

CDROM SPOIL
FLOPPY SPOIL

so now im running 1 stick of DDR400 1GB, Qimonda , no blue screens yet

the moment I plug in the other RAM stick, blue screen, hang, reboot, all kinds of shit

It's been ages am away from this thread! How's everyone doing? Still the same old faces huh.. Anyways, still running P4 2.4A at my work place, just sad is the dell set, unable to OC.

Yeah still here
My good old P4 machine still happily running strongly ^^
Got her juice from a brand new 460W Vantec ION2+ PSU early this year

p4 owner here
I dunno this is northwood or prescott or not



Asrock P4VM890
Kingston 1gb ddr400
Ayam brand kingstar 500w psu

This post has been edited by crthompson: Aug 24 2011, 07:41 AM

It is a Northwood
Prescott comes with 1MB L2 cache, Northwood only 512KB

usually MEMORY failure is due to which more often?

1. Memory stick
2. Memory slot on motherboard

Slot A and Slot B
Memory A and Memory B

I am currently just using Slot A, with Memory A
NO PROBLEMS, NO BSOD

perhaps I should use Slot A, memory B (to see if Memory B is still working ) If i get problems and bluescreens, quite obvious that Memory B is faulty

I know this is the right section to be asking trading stuff but anyone here want to sell off their P4P800 se, please pm me...thanks

I think I threw off my few months back