Heard that HomeDec 2010 in KLCC Convention Centre will be displaying YAMAHA AV Amps, from 29 April to 2 May 2010, heard got  special price there.

Heard that HomeDec 2010 in KLCC Convention Centre will be displaying YAMAHA AV Amps, from 29 April to 2 May 2010, heard got  special price there.

465 should be around 1600, the remaining 900 is enough to buy NSP270 http://www.yamaha.co.jp/english/product/av.../ht/nsp270.html

the last I checked, the speaker set is about 800 +/-

I saw @ Harvey Norman... v465 + Yamaha 5.1 speaker system = RM2499.... expensip?

there are already RX-V X67 models showing up on the web with HDMI 1.4.

hold your horses..

see amazon and sudioholics... though no ETA yet.

Hi there everyone. New owner of an RX465 here =D

Very satisfied with it so far but I've got a little problem that I can't seem to figure out how to fix.

Currently, I have the AVR set up with 2 HDMI input cables from my Xbox 360(HDMI 2) and my Astro Byond(HDMI 1) decoder.

When I switch from HDMI 2 to HDMI 1 while astro Byond is on a HD Channel (573, 575, 832, etc.), the signal to the TV seems to go on and off(sound and image sometimes come on for a second before going blank again) for about 10-20 seconds before the image appears (properly) on the TV. I can hear a switching noise from the AVR occurring every few seconds during this period. The problem doesn't occur when the decoder is on an SD channel.

Any idea what's the problem and does anyone have any solutions..?
...btw, the Xbox is on 1080p reso while the Astro decoder is set to 1080i. I've tried changing the reso of the decoder to 720p but it didn't make a difference.

Oh yea, I can also feel electricity currents whenever I touch the AVR while it's on. Is that normal..?

RX-v565- I play DtsMa Bluray disc, but it only show "DTS" not DTSMA, why?

Hi all,

Just bought a 765 and set it up but noticed that the surround back speakers are not playing at all. The receiver detects the speakers but doesn't play at all even when a test tone is played. I've checked the setup and it's configured at 7.1. I don't know if I'm doing anything wrong. I am really counting on you guys for some help.

Thanks in advance to all.

please be make sure the ZONE 2 is OFF

Hi all,

Just bought a 765 and set it up but noticed that the surround back speakers are not playing at all. The receiver detects the speakers but doesn't play at all even when a test tone is played. I've checked the setup and it's configured at 7.1. I don't know if I'm doing anything wrong. I am really counting on you guys for some help.

Thanks in advance to all.

How much is the 765 that you bought?

Hi All Masters,

I just got the RX-V465, plugged in with my PS3 (via HDMI), DVD player (ancient - Composite cables) , Astro (old - composite cables). Output = HDMI to LCD.

PS3 = no problem, but both my astro + dvd player i cannot get Video , only audio.

Current solution , i plug the Yellow composite direct to my TV.
Anyone has a setup as mine ? i just need to confirm if it only work this way.

From some reviews regarding the 465 below.

"For one, there is no video upconversion to be found on this product. This means that if you connect composite video, you'll only get the results from the composite video output. Same goes for component video and HDMI. There are also no S-video inputs on the back of the receiver "

Thanks in Advance.

guys i've just got a yammy rx-v465 this week. i have 3 hdmi input - ps3,dvd & xbox. the problem i have is when i watch dvd the decoder keeps turning off every 1 minute and then turns back on again. So what u get is a break in sound every 1 minute. But the ps3 and xbox is fine. I call the installer (desa ht) and they claim that it could be that the hdmi cable for my dvd could be faulty. Any feedback from our sifu's here.? Your help is very much appreciated.