owh is it...20hours primed i got 1 error on 1 worker.on IBT on the other hand 20 loop with ease.my temperature also nice hitting 81c on load on all 4cores.

just worry bout my vtt 1.25.

otai sekalian, im having trouble to let my pc hit 3.8ghz, im now on 3.7ghz @ 1.25vcore. when i try set it to 3.8ghz @ 1.26vcore, prime95 just hangged at test1. im at 220block x 17multiplier.

is there little settings that i missed out?

whats ur VTT bro tried @ 1.25?

hang??

pc hang atau prime show an error or test 1 takes ages to complete??

hang. totally hang.

vtt kasi dia 1.25v
vcore kasi dia 1.26v dulu

kalau masih hang atau error up the vcore to 1.28v and try again.

im using p7p55d, my vtt is known as IMC right? cuz i can't find my vtt after such a long time.

yes thats the one.

okay i manage to hit 3.8ghz @ 1.26vcore 1.25vtt.
but my ram is running at 1200mhz only i cant set higher bclock, im at 200x19 only. at 1350mhz, i get bsod. something wrong somewhere?

nothing wrong with ur ram running at that speed. i believe its not enuff vcore...try to up 1 notch and test.

you mean the ram voltage or my vcore?
im running stable now on 200x19. but when my ram timing goes 1350mhz it just gets bsod before im able to boot into windows.

@ezzydamvp

Bro based on your siggy, how do you get CL7 for Team Xtreem 1600, because mine stuck at CL8, CPU-Z & Everest shows that, however when I go back to BIOS clearly it was configured at CL7. Another thing does your ROG post screen kinda corrupted when using higher QPI say 3600-4400? Because mine is liek when using high QPI, had to disable the ROG post screen

i just set it to cl7 in bios n wallaa...

when im using i3 530 the timing also not accurate...but for i5 and i7 dont have this problem. me also dont know y.
and for the ROG logo kinda corrupted u mean like its getting jigsaw and then combine back? yep i got that strange post too oh higher oc and qpi.
i tink its normal

bro,..

wats ur temperature doing 4ghz i7 860?idle and load...thnx

Haha kinda like the logo but had to turn it off I guess it probably CPU-Z/Everest wont show the correct value. Thanks for the info

Hey there guys may i ask if the Linpack option in OCCT is more or less equal to IBT in terms of gauging heat? I just set the data rate to normal.

just change my single rad to dual rad and from supreme LT to supreme HF cpu block and below is the temp.
ar 4Ghz idle is average 30c and full load prime95 is average 60c. while gaming kaw2 only 41c

nobody has any solution for this poor little boy here?

try increase ur cpu vcore abit and imc to 1.3 something...btw wat is ur ram timing?

ram timing is at 9-9-9-24 1333mhz.
but when i move my bclock higher it goes 1350mhz 9-9-9-24 @ 1.5v
IMC1.25 it wont start.