Technically I don't know. As for overclocking and from what I read on other forums/websites, most Dom GT overclockers are using CMG kit

btw, what version is your stick? 2.1,2.2, 2.3?

@hengmy

bro off topic.wat happend to ur UD6?

no display, after post code 96 it wont go FF

Always recommend to oc yourself
Just read guide and take that as a starting point

I see..but I'm just thinking of trying and see where it gets me then i try and improve on it or something because I have never OC-ed before..

scared my new stuff die

easy oc will never good, the best the explore all the oc setting inside bios the get the best picture how the processor speed work

anyone have tried the 655k or 875k? really wanna see how good it will oc with the unlocked multiplier...

i want to ask MSI P55-GD65/80/85 users.. how is the temp of ur mobo? is this board is very hot? coz usually those superpipe design is very hot. can you touch the pipe within 5 sec without let ur hand off? my current giga mobo temp is 50 degree.. = .="

is that high? i touched ud6 before, abit warm only..
mostly stay at < 30c

ah ha
my bbse cant fight elpida hyper

this is the best i can hit with cl8 with 1.65v.increasing voltage till 1.7v wont help increasing much freq.
i guess linx is gud enuf to show this ram stable at cl8 aite?

review in guru3d can hit 2246 with cl9 using this RM640 ram.

i guess gud enuf for those who seek performance/price offered by this trident.
if xcukup jugak,go grab perfect storm which know using elpida hypers too.



i own GD80 before and the pipe seem cool when i touch it.hmm

This post has been edited by BigSaver: Jun 19 2010, 02:48 AM

haha, almsot same as my bbse but cheaper
perfect storm look like not selling already

nice wallpaper BigSaver...

Guys, a question, I oc my i5 750 at 4.0ghz stable (H50 CPU cooler)

Today I change to Corsair Dominator ram, and bios say my OC fail so now I use back original setting.

My question is, what I need to change in the setting? DRAM timing is set at auto. ratio and QPI is 4 and 16.

Thanks

change the bios back to optimise default. try RE-oc bit by bit...make sure QPI set to lowest available...

Guys, I cant seem to get past 4.2ghz.Running at 4ghz now. My settings are as in the picture..Need some help here.Btw, my temp under prime is around 68-70C. Is it fine if I push it further?


Attached thumbnail(s)

fren, ur temp is on load or idle?i think ur ram is limiting the OC.. ur using wat ram?better rams means u have pelnty of space to push ur OC rather than ur value rams.

Using kingston value rams...able to push it to about 1600mhz before this . However I adjusted the ratio to run at 14xx mhz i think. The 70C temp is at max load.

You are going to need a big jump of voltage for 4.2GHz, I'm on 4.27@1.37v. Usually the temp will increase by 10'c but this will depend on various situation.

I will try oc'ing again later..The last time i did 4.2 at 1.33V if im not mistaken . However, i didnt prime it long enough ( approx 30min )