I will bring an additional Aurora SSC P7 if no one bring, it is 900 lumens, but it is a flood light.

will like to see that.
Most of the time actually only need flood. Very rarely do we need to see things at a long distance at night. Unless search and rescue or something. But in the true spirit of flashaholism, get both!

neutral eh?

neutral white, IMO, is the closest rendering of the sun's colour.

currently using a 'neutral' filter from gw2u inside my diffuser cap.

true spirit of flashaholism, I like that. Will bring the P7 then.

NS: Can, if I go la. =D

I'll try to make it. I'll bring ALL my lights. Which is not that many. lol

you know what, somebody should bring in the stanley HID or do a group buy.
I'm pretty darn sure a whole lot of people will grab that...

strinq, I kind a like the bezel of your avatar, mind to tell me what is the flashlight uses this bezel?


But I think the beam shot will be pretty ugly (haha, pretty and ugly can mix)

This post has been edited by susuman: Oct 9 2009, 12:59 AM

Looks like a Solarforce SS bezel

Oh man! I cant make it on the 24th!! I have a church thing going on... Totally forgot

Man...

Hey I just went thru your previous posts! Sorry really busy these days... =(

I'll just add what I think about Eagletac. Mwahaha!

Sorry to say this but Eagletac does have some (quite serious) design issues. The good part is that they honor their warranty and they are fast to fix their problems. =)

Here are some examples:

The old P/T10 series had a HUGE problem with lens breaking. Many have reported it and it was due to a horrible design. But it was fixed soon after it was discovered with silicon inserts. =D

The M2 series had that horrible strobe that was soooo near the max. It also had water leakage issues. But it was fixed even faster than the lens issues.

The P100 series has many off centre emitters and donut holes in it's beam. Also reports of weak anodizing. This probably has been fixed too.

So... conclusion is..

Eagletac has design issues (a lot of companies have this)
Eagletac has good warranty and fixes problems with whatever issues they have.
My hybrid T10/LC2 rocks.
Buy Eagletac without worrying.
I love the P100 cos it's cheap, awesome and now... (drum rolls) comes with neutral white!!!! Lalala

Haha, polkiuj, I got T20C2 RGB KIT Neutral White yesterday, no problem so far, beam not tested yet. But it looks good tight hot spot with the SMO reflector, and the OP reflector is smooth.

So far so good, just a issue not problem, it's reverse polarity protection design, it has a very short + node with a ring protecting it from reversal battery insert, so I have 18650 that the + node is recessed, so if you pump the flashlight when you on, it tents to off/on back, or when you twist the head to switch general mode from high, it might off too. Anyway it is fixed if use a proper 18650 + node (non recessed).

Anyway, it has a very nice CR123A tube, so using 2 CR123A is possible without battery rattle inside the body, nice design though.

The RGB kit is even better, very nice beam. Unlike Jetbeam, the SS Bezel cannot removed, the glass lens will not fall off, it was hold from the inside, which is GREAT design. Some lights when you change the Bezel, the glass lens is loose too, might fell off accidentally.

Agree, which light don't have an issue or design problem? My surefire E2DL has a issue in the tailcap string too, it was "Senget" a bit, and trigger on when you un-screwing the tailcap. and it is not gold plated!!!!

---

Added on October 9, 2009, 10:47 amBelow are the map for the McD
Map McD Tmn Equine, Seri Kembangan
Satelit View

If you have a GPS, the coordinates are:
N 02*59.747'
E 101*40.221'

This post has been edited by susuman: Oct 9 2009, 10:50 AM

Awww man... are you on duty or something? Can skip for the flashaholic gathering? Or maybe come later? We'll still be around

You mean the positive node with a nipple right? I read somewhere can use a small screw nut to act as the nipple for the positive node. Not sure how to stick it... glue on the edge just enuf to stick but still have contact, though I dont think it's safe to solder.

Added to orginal post, and updated list.

How bout the rest? Philight, Refnulf, Alantch, dannie, gwen, Striderman, who else ...

Rookie!! why serdang cannot?

walao. liedat la now. after meeting in gw2u, can forget me la!



This post has been edited by Nightstalker1993: Oct 9 2009, 11:47 AM

susuman: philightsophy is right. It's a solarforce bezel.

Bwahaha, your name already in the list la, check out my signature link, see what i wrote there

At the moment not confirm yet. Will let you know if we can go or not...
Thanks for the invite

Ok, thanks, hmmm you have that? Where the best place to buy solarforce ah? I dun like US, because usually no insurance is offered and take long time to arrive. Thanks again.

Hi guys,

What polkiuj shared is true, regarding ET's past design faults, and it is fortunate that ET managed to fix most of it (strobe is too easily accessed though). Later batches of the '10' models has a redesigned head, which will hold and protect the lens better (like the model polkiuj has )
The anodizing on the '100' seems to be better on the new batches, but I still can't comment how it will hold up. I do know that anodizing on aggressive knurlings seems to be a bit weaker due to very small contact point for the anodizing to bond to the light. Either ways, keeping my fingers crossed on this
For ET lights, the use of button top cells is required due to a physical reverse polarity ring.

PS: I feedback good and bad response to ET, including my own opinion. I am still an flashlight enthusiast first

Don't have bro, just took the pic off the net.
Hmm, i think dx is fine. But lots of ppl have complained about them.
Best if u spend enough to get them to ship with a tracking number. I think minimum of USD80 or something like that.

hi guys... i just made an order for a p10a2... hope will arrive next week... 4sevens promotion made me just want to get one (my first light)... too bad the p100a2 already out of stock when i wanted to buy... so i had to go for a p10a2... hope it wont disappoint

This post has been edited by ptewee: Oct 9 2009, 01:30 PM