cooler master hyper 212+ cheap and nice
AMD® Socket AM3 Unlocking 4th CORE Thread ~, Those Who Have Tried,Please List it HERE
|
|
 Apr 4 2010, 11:47 PM
|
 
Junior Member
108 posts Joined: Jun 2006 
|
|
Quote|
|
|
|
|
Apr 5 2010, 11:21 AM
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu. 
|
QUOTE(dreaming @ Apr 4 2010, 10:27 AM) @acap_20 that's one hell of a batch... 4.3GHz capable w/ right kinda hardware combination + hardcore tweakin... already stated at the early post - it is 1003 CPMW with alphabet "T" on the pcb.   QUOTE(kuntawakaw @ Apr 4 2010, 02:45 PM) but NB freq the higher the better..ofkos it have its optimum value for CPU speed vs NB freq.. but the main idea is higher is better...with deneb c2, 2.6ghz not a problem with stock vnb..the c3 i donno..2.8ghz? not really bro, imc differ from chips to chips. 2.6GHz is doable on c2 but not all w/ stock volt, some even top up @ 2..5GHz ish regardless what kinda volt pumped. same w/ 2.8GHz on c3, not all is capable doin that w/ stock volt. out of 2 chips i've tested, both max out @ 2.7xGHz w/ moderate volt (<1.4v), 3GHz is a no go regardless what kinda volt i gave.  |
|
|
Apr 5 2010, 12:06 PM
|
Elite
5,602 posts Joined: Jul 2007 From: The Holiest Of Hole
|
QUOTE(ah_khoo @ Apr 5 2010, 11:21 AM) that's one hell of a batch... 4.3GHz capable w/ right kinda hardware combination + hardcore tweakin... 2.6ghz fail after 15minutes of prime95 for stock voltage. not really bro, imc differ from chips to chips. 2.6GHz is doable on c2 but not all w/ stock volt, some even top up @ 2..5GHz ish regardless what kinda volt pumped. same w/ 2.8GHz on c3, not all is capable doin that w/ stock volt. out of 2 chips i've tested, both max out @ 2.7xGHz w/ moderate volt (<1.4v), 3GHz is a no go regardless what kinda volt i gave. i think i'll stick to 2.4ghz for now. |
|
|
Apr 5 2010, 12:09 PM
|
Junior Member
124 posts Joined: Nov 2006
|
is that big different between 2ghz and 2.6ghz?
i ran Pi, fritz chess benchmark and 3dmark vantage, seem like not much different. |
|
|
Apr 5 2010, 12:18 PM
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Apr 5 2010, 11:21 AM) that's one hell of a batch... 4.3GHz capable w/ right kinda hardware combination + hardcore tweakin... yeah...i was wrong about that... sorry not really bro, imc differ from chips to chips. 2.6GHz is doable on c2 but not all w/ stock volt, some even top up @ 2..5GHz ish regardless what kinda volt pumped. same w/ 2.8GHz on c3, not all is capable doin that w/ stock volt. out of 2 chips i've tested, both max out @ 2.7xGHz w/ moderate volt (<1.4v), 3GHz is a no go regardless what kinda volt i gave.  rusted over here..too long havent OC... when i check back last night my SS's, its 2.4 only...2.6 obtainable with alittle increment of vnb.. so did told hilmiangah about this as AMD OC thread.. |
|
|
Apr 5 2010, 12:28 PM
|
|
Elite
5,602 posts Joined: Jul 2007 From: The Holiest Of Hole
|
QUOTE(dreaming @ Apr 5 2010, 12:09 PM) is that big different between 2ghz and 2.6ghz? try running everest memory and cache benchmark.i ran Pi, fritz chess benchmark and 3dmark vantage, seem like not much different. should see a considerable amount of performance gained. |
|
|
|
|
|
Apr 6 2010, 11:56 AM
|
|
Junior Member
124 posts Joined: Nov 2006
|
i had tried nb 2.6ghz and prime stable for 2 hours +
 another tried on 4ghz with nb 2.6ghz, passed pi32mb & fritz chess  still dare not to prime with cheapo redscoprion  |
|
|
Apr 6 2010, 12:01 PM
|
|
Elite
5,602 posts Joined: Jul 2007 From: The Holiest Of Hole
|
ramp up the ram to 1600mhz cl8 if possible now
|
|
|
Apr 6 2010, 12:55 PM
|
|
Junior Member
124 posts Joined: Nov 2006
|
cheapo corsair vs 1333mhz couldn't load window with 1600Mhz
|
|
|
Apr 6 2010, 12:56 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dreaming @ Apr 6 2010, 12:55 PM) cheapo corsair vs 1333mhz couldn't load window with 1600Mhz try ddr3 1333+ @ cas 7 then. |
|
|
Apr 7 2010, 04:09 PM
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru 
|
here my attempt..... plsss shifu give a comment
  i just notice that my bios setting got 2 vcore setting : Vdd vcore and Vcore.. any1 can explain  thx Added on April 7, 2010, 4:11 pmdreaming... wah how come u manage to OC 3.6ghz on 1.3v aye?  This post has been edited by fatalynx05: Apr 7 2010, 04:11 PM |
|
|
Apr 7 2010, 04:28 PM
|
Senior Member
1,991 posts Joined: May 2008 From: OuTeR sPaCe!!
|
QUOTE(fatalynx05 @ Apr 7 2010, 04:09 PM) here my attempt..... plsss shifu give a comment he is using 555->B55 i just notice that my bios setting got 2 vcore setting : Vdd vcore and Vcore.. any1 can explain thx Added on April 7, 2010, 4:11 pmdreaming... wah how come u manage to OC 3.6ghz on 1.3v aye? u r using 550->B50 my B50 can't do 3.6 at 1.35V as well..  |
|
|
Apr 7 2010, 04:42 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(lhongwuh @ Apr 7 2010, 04:28 PM) he is using 555->B55 decent batches of c3 can do 3.6GHz @ 1.3v or below on decent board, while for c2, some managed w/ only slightly > 1.3v. mobo does play a big role there, but as we all knew, software reading not always d most accurate source, d only way to find out true value is to have it measured usin dmm... u r using 550->B50 my B50 can't do 3.6 at 1.35V as well.. c3: http://forum.lowyat.net/index.php?act=Atta...post&id=1429544 c2: http://forum.lowyat.net/index.php?act=Atta...post&id=1313809 This post has been edited by ah_khoo: Apr 7 2010, 04:54 PM |
|
|
|
|
|
Apr 7 2010, 04:54 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Apr 7 2010, 04:42 PM) decent batches of c3 can do 3.6GHz @ 1.3v or below on decent board, while for c2, some managed w/ only slightly > 1.3v. mobo does play a big role there, but as we all know, software reading not always d most accurate source, d only way to find out true value is to have it measure usin dmm... wah urs 3.6 on 1.3...mine last time 1.38v...now on 3.7 need more 1.4v c3: http://forum.lowyat.net/index.php?act=Atta...post&id=1429544 c2: http://forum.lowyat.net/index.php?act=Atta...post&id=1313809  ...sorry lah i long time never OC lol so shifu if the cpu need 1.438v what should i put for : CPU Vdd voltage CPU voltage... kinda confius...thx |
|
|
Apr 7 2010, 05:00 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Apr 7 2010, 04:54 PM) wah urs 3.6 on 1.3...mine last time 1.38v...now on 3.7 need more 1.4v 1.344V VS 1.38v not so big diff, some more c45 is value board, can't really compare w/ mid range/premium boards. my ex g45 (yes, i'm sellin it tomorrow) has voltage fluctuation issue. auto 0.05v increase from idle to load. ...sorry lah i long time never OC lol so shifu if the cpu need 1.438v what should i put for : CPU Vdd voltage CPU voltage... kinda confius...thx play w/ spu voltage enuf... u can always set d desired voltage & check in bios. |
|
|
Apr 7 2010, 05:17 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Apr 7 2010, 05:00 PM) 1.344V VS 1.38v not so big diff, some more c45 is value board, can't really compare w/ mid range/premium boards. my ex g45 (yes, i'm sellin it tomorrow) has voltage fluctuation issue. auto 0.05v increase from idle to load. hahaha..i forgot iam using cheapo mobo play w/ spu voltage enuf... u can always set d desired voltage & check in bios. currently trying 7-7-7-20-28 1T on 708mhz on 1.67v ... huhu kinda surprise cheapo kingston can do it   |
|
|
Apr 7 2010, 05:40 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Apr 7 2010, 05:17 PM) hahaha..i forgot iam using cheapo mobo dun pi it, prime it instead to ensure stability... 32m is d minimum i'll go, i always prefer p95 thou... currently trying 7-7-7-20-28 1T on 708mhz on 1.67v ... huhu kinda surprise cheapo kingston can do it » Click to show Spoiler - click again to hide... « This post has been edited by ah_khoo: Apr 7 2010, 05:41 PM |
|
|
Apr 7 2010, 06:12 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Apr 7 2010, 05:40 PM) dun pi it, prime it instead to ensure stability... 32m is d minimum i'll go, i always prefer p95 thou... ok bro...i give it a try sure heart pumping Added on April 7, 2010, 7:25 pmhere it goes...my kingston cap murah  kinda surprise...  Added on April 8, 2010, 1:35 am1500mhz...  This post has been edited by fatalynx05: Apr 8 2010, 01:35 AM |
|
|
Apr 9 2010, 08:15 PM
|
|
Junior Member
82 posts Joined: Jan 2010 From: Wangsa Maju, Johor Bahru
|
My final attempt to reach 4GHz stable enough to make 3DMark06 bench but fail Prime95 test within 5 mins..
 |
|
|
Apr 11 2010, 04:46 PM
|
Junior Member
32 posts Joined: Apr 2008
|
This morning i'm wasting my money to buy AMD Phenom X2 550BE @ 3.1Ghz.
The price only RM315 OMG!! Damn cheap..(anyone interested let me know )My batch number (i think my batch is the 1st to unlock here, so far laa..) Batch # 0931DPMW, yes 0931DPMW unlock to 4th Core without any error. Haven't done any stress test yet, but i will try to keep update here.  |
| Change to: |  0.0230sec
 0.39
 6 queries
 GZIP Disabled
Time is now: 5th December 2025 - 12:06 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.