just get a x2 555be, unlocked and oc to 3.8ghz...

prime Large FFT with priority 9 for an hour+ :

@kuntawakaw
is that big different between Large FFT & Blend?
btw, i'll try Blend

@acap_20
it is 1003 CPMW with alphabet "T" on the pcb.

@makoshark
i'm using xigmatek redscorpion

@makoshark
nice 1...

hitting 4ghz now.
Passed PI 4 x 8mb and fritz chess benchmark, but i dare not to run prime95, dont know will burn the chip or not..



btw, the chip manage to do 2 hours prime stable (blend test with priority 9) at 3.6Ghz with default voltage.



gonna set this for daily use

@acap_20
already stated at the early post - it is 1003 CPMW with alphabet "T" on the pcb.

my proc is BE version, so i guess it is easy to oc by adjusting the cpu multiplier and cpu voltage only.

i'm using asus M4A785TD-V EVO, sometime when the voltage is dropping too much (aka vdrop & vdroop), i'll change the Loadline Calibration setting from Auto to either16% or 12%. It will make the voltage more stable.

so far, i just tried on cpu multiplier, cpu voltage and Loadline Calibration. i didn't touch on NB, FSB, RAM, and HT Link because i'm kinda noob on those setting

This post has been edited by dreaming: Apr 4 2010, 11:02 AM

is that big different between 2ghz and 2.6ghz?
i ran Pi, fritz chess benchmark and 3dmark vantage, seem like not much different.

i had tried nb 2.6ghz and prime stable for 2 hours +



another tried on 4ghz with nb 2.6ghz, passed pi32mb & fritz chess



still dare not to prime with cheapo redscoprion

cheapo corsair vs 1333mhz couldn't load window with 1600Mhz