disabled the CnQ?
AMD® Socket AM2&AM3 Overclocking V19, There's still few beasts hiding...
AMD® Socket AM2&AM3 Overclocking V19, There's still few beasts hiding...
|
|
Jul 22 2009, 09:28 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,753 posts Joined: Jan 2003 |
disabled the CnQ?
|
|
|
|
|
|
Jul 22 2009, 10:19 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang |
QUOTE(ah_khoo @ Jul 22 2009, 09:12 AM) most likely is d chokes coz i dun think mostfets are capable of makin sound... Miahahaha, my bad for trying to push the HT above 275mhz ler.. woot, if that's d case u gotta really kepp d temp cool for d pwm, gigabyte has more phase byrite this kinda thing won't happen. rma d board mebe? it's not gud for long run imo even u've solved it by it's not a permanent solution. me oso hutang keliling pinggang mah... prisoners to loans we are... After reading the Ahsus bashing Giga facts that u posted i'm starting to wonder if it really has 8 phase pwm's Yup hutang2 hutang2 keliling pinggang |
|
|
Jul 22 2009, 10:21 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang |
|
|
|
Jul 22 2009, 10:26 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu. |
QUOTE(cloudwan @ Jul 22 2009, 10:19 AM) Miahahaha, my bad for trying to push the HT above 275mhz ler.. i started to wonder why my chip can't be pushed > 270htt, am3 platform is meant for BE chips perhaps? guess i need more tutorials coz i'm pretty sure my ram can take > 720MHz coz they're able to memtest stable... After reading the Ahsus bashing Giga facts that u posted i'm starting to wonder if it really has 8 phase pwm's Yup hutang2 hutang2 keliling pinggang it depends on d no of "drivers" to determine d real no. of phases available iirc. asus sure gud in bashin eh? |
|
|
Jul 22 2009, 10:39 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang |
QUOTE(ah_khoo @ Jul 22 2009, 10:26 AM) i started to wonder why my chip can't be pushed > 270htt, am3 platform is meant for BE chips perhaps? guess i need more tutorials coz i'm pretty sure my ram can take > 720MHz coz they're able to memtest stable... Ya lor, macam mau kire balik how many real phases are there actually at my mobo ler like this..it depends on d no of "drivers" to determine d real no. of phases available iirc. asus sure gud in bashin eh? But i think should be around 4+1 phases tho Iyer ahsus really terrer at bashing other people products... |
|
|
Jul 22 2009, 10:53 AM
|
![]() ![]()
Junior Member
175 posts Joined: May 2009 |
@cloudwan
Gaygaybyte mobo ok ha? |
|
|
|
|
|
Jul 22 2009, 10:55 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,094 posts Joined: Mar 2009 |
QUOTE(ah_khoo @ Jul 22 2009, 08:29 AM) forgot bout idle coz i don't really care bout it, on load all are under 50'c @ 3.4GHz w/ 1.312v vcore. iirc: my tmpin0 = near to 50'c tmpin1 = below 40'c tmpin2 = near to 50'c d low temp could due to low clock on d chip, unlike most of u, my chip can only do a 3.4~3.5GHz. temp increases when clock increases even volt remains unchanged or lower. weird case u got there bro, but usually buzzin sound comes from 2 sources, either psu (which is unlikely in this case coz u've verified it) or d chokes. used to have that kinda buzzin sound too when i was on ta790gx a2+ iirc. not bothered by it neway coz i know soon or later d board gotta go, i was runnin htt @ 270~280 back then... time for a change bro? ta790gx a3+ clan always welcome u w open arms... tmpin 0 alwys more than 50 even idle o load... |
|
|
Jul 22 2009, 11:02 AM
|
![]() ![]()
Junior Member
175 posts Joined: May 2009 |
|
|
|
Jul 22 2009, 11:18 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,030 posts Joined: Sep 2006 From: GGWP |
asus 40C...
|
|
|
Jul 22 2009, 11:26 AM
|
![]() ![]()
Junior Member
175 posts Joined: May 2009 |
|
|
|
Jul 22 2009, 11:27 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
7,318 posts Joined: Nov 2006 From: Pulau Sipadan |
|
|
|
Jul 22 2009, 11:30 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,753 posts Joined: Jan 2003 |
|
|
|
Jul 22 2009, 11:32 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu. |
|
|
|
|
|
|
Jul 22 2009, 11:44 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,030 posts Joined: Sep 2006 From: GGWP |
|
|
|
Jul 22 2009, 11:45 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang |
QUOTE(amdhunter @ Jul 22 2009, 10:53 AM) Ok so far, i was able to push my cpu further comparing when i was on my older B n M..Read a few reviews and most of them say the mobo is good for its price.. QUOTE(ah_khoo @ Jul 22 2009, 11:32 AM) Miahahaha, wish i could use that NB cooler, but with my CCF installed no other NB sinks can be fitted except for the stock sink i think This post has been edited by cloudwan: Jul 22 2009, 11:45 AM |
|
|
Jul 22 2009, 11:59 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,753 posts Joined: Jan 2003 |
hit like this la...
![]() |
|
|
Jul 22 2009, 12:06 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang |
QUOTE(8tvt @ Jul 22 2009, 11:59 AM) Miahahaha, i was trying that too but it's a no go, 1st time since using the mobo it wouldn't boot I think it was more of a cpu issue instead of mobo issue ah.. My cpu kinda let down a bit ah, even going up to 3.5ghz also needed more volt than that This post has been edited by cloudwan: Jul 22 2009, 12:06 PM |
|
|
Jul 22 2009, 12:11 PM
|
![]() ![]()
Junior Member
142 posts Joined: Feb 2006 |
|
|
|
Jul 22 2009, 12:14 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu. |
|
|
|
Jul 22 2009, 12:17 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang |
|
|
Topic ClosedOptions
|
| Change to: | 0.0225sec
0.45
6 queries
GZIP Disabled
Time is now: 30th November 2025 - 09:00 AM |