http://forum.lowyat.net/topic/1095785

cellshock on sales!!! 

i donno why..when i go caseless...it can

haish...will update again later

aiya...going to pitcha pulak...taking girls picha? later ur wife increase the intrest of ur casing
short curcuit...i dont think so since the mobo sit on the short half screw..u know what i mean? that the one extend the hole to be reach to mobo..so mobo is floating on it...
6gb of tracer..wakakak..loves the led dancing

not yet..priming 1st... later once got a good result then baru put inside that casing again
5 lubang?   

trichannel? AMD Core i550 meh?

yeah..i did join aiseben secretly
dush..
oic
hoo..put there as much fan as u can la boss...

received my nidec 40mm fan edi..now to cool down the mosfet time...

and just notice my nb8 left unuse... now time to use it la. .huhuh

for the sake of bling2..keh..i bought zalman cf700 cu just becos it has a blu led

done put the nidec fan at my mosfets..deng..noisy... and done putting on nb cooler...hope its not like last time la...

Fuyooo baru perasan:

<< AMD Phenom II X4 940BE @ 3.01 GHz, OC at 3.63GHz >> << Asus M4A78-E >> << Kingston ValueRAM DDR2 800MHz 2X2GB >>
<< Sunbeam CCF + Tuniq TX2 >> << Corsair TX750 >> << Palit 9800GT 512MB >> << Seagate 250GB >>
<< Custom Casing >> << Asus DVD-RW >> << Razer Krait + Goliathus WOW >> << Samsung Keyboard >>

Suda tukar PSU bro?       

Demmmm semua kasik tukar PSU powah powah..   

tu la. semua kaya T.T.
me oni 650W.

damn it. bully me T.T

fuwah..all power power stuff and power power oc 

kunta u also attack mode now hehe..now im running mine 3.4@X4..finally can enjoy some smooth gaming 

1.45 is the max for Air cooled!!

All da best! :peace:Dont bising²...later kena tiau woor! :sweat:Ha Ha Ha...

bobiac its simple ler...go into bios an Enable this option : ACPI XSDT TABLE 

[attachmentid=1079106]

And wallaa...you already have successfully got your vista working...

 
Yup. If your current BIOS is not the one, you need to flash to unlock the core.
Enable ACC. Am I right? 

-pWs-

as my prediction...
i will be the last man here to stay at ddr2..or mebbe ventrilocks the last..

@cloudwan..where to set the ht and nb volt at ta790gx 128? cant find it.. but i did saw the volt at bios HW health tab

dun wori bro kunta...i tink i will the last ppl usein ddr2....=.=..

u know whre rock rock shop located?

tired for waiting TA790GXE..mayb going hunt DFI...

hmm....hope the seller can get the board 2day -,-....
u know the shop name?

i did touch all the heatpipes that very near to the base..and did touch the other side of my proc... also the cooler base -while IBTing
only the slight heat can be detected..deng... im worry bout it..

any 550be + ta790gx user here? pls help

nope nope nope...i hope u read my post properly...
small >>>pass..proc stable
large>>> pass..ram stable

@bolded it stopped before it start...
and i just restart, and then primable... i donno for how long...wake up it failed..

and ts..i did mention few times edi.. i know my ram limit edi..and nb freq, i roughly know.. 3.6ghz can up to 27XXmhz..3.8ghz have to lower down to 25XX
im tired of burning in...
can i just make it 2hrs only? here some ss... my undervolt program..

hahaha...very busy wan...shopping spree!

ahahaha...dun have time much to check the steppings on the 550BE that i've got...lucky to know it from u...ahahaha

for 0922CPMW --> http://www.xtremesystems.org/forums/showthread.php?t=227004

haha, i can definitely understand that. unfortunately, that OC was unstable in the memory test, i was getting errors in sp2004 and then i decided to clock it with memtest, also no luck regardless of the voltage. i didnt dare go beyond 2.25, and it was still erroring so now i'm pushing it back to the 3:4 (533) divider and pushing my fsb as far as it can go. i'll try it with p95 later sp2004 running stable for 12+ hours as i'm writing now.

current settings would be:
fsb: 285mhz
cpu: 2567mhz @ 1.26V
ram: 760mhz (4-4-4-12) @ 1.8V

will try tightening my timings again later i just realized that while its a lot of work, this is more fun than i imagined my old athlon was an unlocked chip, so there wasnt much to do, but when you're working with so many constraints its very satisfying to get the most out of your equipment!

Sibok mau bling2 jugak, kasik pasang lampu kalimatang dalam ur casing lah