how much the cost to change timing belt + workmanship fee ? got any good shop in Shah Alam ?

I've tried asking him. He said he has it available but haven't heard from him. Said he was busy yesterday but now when I call him, no answer pulak.

Anyway, I'm thinking of going to proton parts at glenmarie tmr. Does anyone know if they are open on weekends?

i think temoro open maybe.. coz their PSC open.. suppose to open olso la

This post has been edited by ahlong: Oct 30 2009, 10:40 PM

Went to Proton Parts this morning. The cover is only RM37.18. They only have unpainted (black) and silver though. Mine's gray but I took silver anyway. Not much difference but there is a slight color variation.

the price different so big...

did balancing and alignment yesterday, so far no more sound yet... keep monitoring first..woho..thanks


another thing, after fix ARB19mm , there's nyek nyek sound coming from behind... isit normal or not, or the ARB is not properly fixed.

nice to hear it solved already

nyek nyek "normal" liao. my car got that sound too..

same.. also got nyek nyek sound when i get in or get out of the car.. sometimes go over road humps also got that sound..

anybody knows how to change gen2 hu player?

i want to upgrade it to latest gen2 cd player that support mp3

now dont know how to take out the original one



This post has been edited by s@ni: Nov 2 2009, 10:07 PM

how to change / remove gen2 / persona cd player / audio



1. remove the first part using your nail / plastic card slowly and safely
2. unscrew 2 screws at the left and right
3. remove all the cable at the rear
4. now u see 2 screws at the top of your audio player. unscrew both
5. now unscrew these 2 screws
6. this part is a little bit tricky, do it carefully.with your finger/card/anything soft, pick at the edge of the lower plastic part *the part under the audio player*, then u will see the screw. unscrew it. left and right.



7. now unplug all cables of the audio unit




thanx to l30n91120 who guide me through hp.

Hey guys,

anyone here installed the projector ccfl headlights?
Does it come with a daytime driving light bulb? (the one that turns on when u turn the headlight switch once)

Reason I ask is because I plan to install them on my car...but do not plan to use the CCFL that much (gonna use external switch for ccfl) cuz I'm not really a fan of the ccfl, just want the projector part of the headlight...

chinook, sorry i dont know

using standard lamp only

maybe other sifus can help u

GUys.... any of u change the absorber? i wanted to change to sports absorber... any to recommend? budget best below 700... anything higher i would go for adjustable... but i dun wan it to be so bumpy... lol soft hard is too expensive to play.. hahahaha

if rm700 is ur budget
go for Sapura Pro-Ride (performance one.. yellow colour)
got someone selling this brand at garage sales.. cheap summore..
FYI, im using it and its the best setup for daily/malaysia road driving..

if want adjustable, make sure the spring rate suitable for ur driving style..

p/s: i prefer Sapura Pro-Ride coz its suitable with our Gen2.. the best setup i've used for now..

my abs - R3 spring + sapura pro-ride (performance) with 15 rims..

oh seems that sapura is the oem manufacturer for proton and perodua

nice to hear that they have come out with their own performance brand

anybody knows where to install gen2 headrest for the rear seat?

1.3 doesnt come with headrest liao

This post has been edited by s@ni: Nov 7 2009, 03:20 PM

bro its my mistake.. i thought he was talking about the buttons module...the cover only i guess it should be cheap...

hello bros, any1 using K&N or Simota drop in filter here? what's d verdict?plz advice..Thx

prefer on K&N.

anyone changed manual transmission oil before? any recommendations? it was recommended that gear oil be changed at 50k for MT and 40k for AT.

if need to change.. how much (amount) is required? same as engine oil (4litres)?