btw, do u guys use RON95 or RON97 for your Gen2???
any significant difference?

bump!

ron95 should be ok

1)10w40 is standard if not mistaken...i've tried torqnm 0w30...engine feels lighter but higher speeds engine starts roaring like no tomorrow...currently using jtx 15w50...low end abit sluggish but cruising is abit better....

2)u can use 195/55...u have better traction on the road as the width is larger to ur current tyre...u can use 195/50...i presume the shop ask u to use parada...nice during dry but gone case la if wet...fc depends on ur right foot...the lighter the foot,the better....

stock tyres for 1.6 version is 195/55/15
for 1.3 , if u change to stock tyres gen2 1.6 is ok..more stable..but ur pick up will decrease a little bit..
ron95 sholud be ok..i think u slightly will feel dffrnt compare to ron97..
but if u have more money...go for ron97..for ur enjin

drop in filter is the highflow filter, ur original filter , engine air intake filter.
the drop in means it is drop-in only, no need modify. something like plug-and-play in automotive term. u just replace the ori one with the high flow one, better airflow will gain slightly mroe power.

Anyone wana sell their clock now?

clock?

that center clock?

ko tuka brake tadano la kompom menggigit haha

1. gen2 piston heavy? what stupid reason...if use thinner oil or full synthetic, there are chances for the oil to dissipate thru the tiny holes within the engine. that's the reason why old cars are not recommended to use fully synth oil...semi synthetic oil is enough

if u use thinner eng oil, like hazril said the engine would make noise at higher rpm...anyway different engine different characteristic based on how u maintain the car over the years...for general semi is enough...

2. for standard 1.6 engine, the tyre size is 195/55/15...195/50/15 gives better stability because the sidewall is thinner so during cornering the tyre will have stiffer walls and it would not bent(is that the correct term???) and increase chance of oversteer/understeer...but remember 50 n 55 series not much different...maxxis ma-z1 oso got 195/50/15 in case u r interested...

one member has changed the slot and can read here:

http://www.gen2club.com/v2/forum/index.php?topic=30706.0

PS if u cant see the thread register la...many info there

ron95 or ron97 oso can...not much different...just louder ping for 95...

thanks shazmn!

yeah, i know the standard for 1.6 is 195/55...but i am driving a 1.3 version...so, the standard is 185/55...i prefer to stick to the original 185/55 R15...but it seems it is difficult to find the tyre size (or the tyre shop lazy to find..haha)...

and if u happen to change to 195 width tires (and use back ori rim).. will the tire be softer at the wall? since the ori 1 is 185 width..

This post has been edited by wandzul: May 30 2010, 12:57 AM

bape sen tu jenal...???aku nak dpn blakang...

cost me around 270. new set of ignition 150 and sensor 120. without the sensor u cant start the engine. the pomen told me la. fffuuu..

tq braderrrrrr

this one makes me eat maggi the whole month

---

Added on May 30, 2010, 3:03 amThe topic or board you are looking for appears to be either missing or off limits to you.

adeh, nih siap ade limit2 ni, dah register pun ade limit gak..

This post has been edited by s@ni: May 30 2010, 03:03 AM

this one how to sell??

http://www.mudah.my/Jam+gen2-4715047.htm

do u guys experience dried rusty marks (i assume it was watery rust and dried the next morning) on your disc brakes of Gen 2??
Mine gives such marks especially after heavy rain..sometimes, the rust sort of stuck the brakes, where when i start my car in the morning, it gives a loud crack before allowing the car to move..as if the rust from the discs join the brake pads, thus causing the loud crack when force is applied..

same like mine

eh..got no userbar for this gen2 owners eh?? hehee..

any good reliable brake pad to intro? not high end, anything suitable for daily use

---

Added on May 30, 2010, 9:24 pmfound the answer

AFI OLYMAS sapa jual kat sini? sapura pro ride ade rasenye kat garage sales

This post has been edited by s@ni: May 30 2010, 09:24 PM

same here also bro....dunno why that happen....

been using ferodo all this while...now on my fifth set already...