the base are meant to be just put on table like that?
no screws needed?
stable enough?
looks nice but the price tag

hi i am new here i want to some of you u guys use hdmi cables right? with your lcds that has hdmi? which hdmi cables you use?
i am not talking about dvi to hdmi cable
hdmi to hdmi MSIA market dont have good brand hdmi cables i know it doesnt matter. But just to take a survey do you use hdmi to hdmi RM 25 ones? I only found logitech and belkin hdmi cables here monster cables i dont like too exensive
or do you use chinese hdmi cables??

Just bought myself a Samsung 2494HS(5ms, 50000:1DC, Full HD), RM799+ 4G thumb drive FOC. Tested it with some game. It produces way better picture than my aging Dell 2407wpc, especially on dark area.
I don't quite like the touch sensitive panel control though, i would prefer the old button method. The touch is so sensitive that you don't have to actually touch the panel, just near it is enough to activate the button.
Anyone here using this model? Care to share the setting? I've yet to calibrate my unit.

so what do you think of the monitor?

Can anyone tell what's the difference between P2350 and P2370?
Thinking of getting one today later in the day.

P2370 has only DVI-I connector and brightness is 250 while P2350 has DVI-D and 15 D-SUB and brightness of 300.
I was considering this two unit as well before i made my purchase. I choosed 2494HS over this two models mainly due to 2494 has HDMI, D-SUB and DVI.

hmm, as a gamer do you think 2494HS is a good choice or P2350 will be better.

haha...4 me 1920*1200 is definitely better than 1920*1080...so no harm spending another 200 4 extra 120 height pixels

This post has been edited by skylinegtr34rule4life: Sep 2 2009, 11:38 AM

I hate seeing black bar on top and bottom when gaming in HD(PS3/X360). That is why i swap my Dell 24" out with this one.

The different is only on 2ms vs 5ms, you can't possibly observe the different with our naked eye. Beside, those figure are just a marketing gimmick. Basically, 2ms will theoratically get you a maximum refresh rate of 500Hz, while 5ms is 200Hz. Both are way better than your 59 or 60Hz lcd monitor can handle.

This post has been edited by chtan: Sep 2 2009, 12:12 PM

Just wondering, is it neccessary to have HMDI if I want to plug in PS3 to play on the LCD with good graphics? If yes which one would you recommend out of the samsumg lcd series

HDMI is the prefered connector for PS3 or even X360. Of course there are also adaptor available to convert to various connector, but i prefer native connector.
I'm afraid that Samsung range which offer a good display, design with HDMI is very limited, in this case only T240 or 2494HS. While in Taiwan there is more choice available, P2450H Lavendar.

HDMI port is a reason why i choose 2494HS over P2370/P2350.

This post has been edited by chtan: Sep 2 2009, 02:21 PM

hi guys,
i need help please.

right now comparing
22"
-samsung P2250
- BenQ E2200HD

20"
-BenQ G2020HD
-samsung P2050

mainly for movies and pictures post processing.
and will hook it up with my acer 4520 laptop (DVI).

dont mind going for 20" since it;s a laptop GC. not sure whether can support 22".the price almost the same. that's why still considering 22"


wanna ask in term of quality of image, viewing angle, product quality, warranty tolerance (pixel problem). which one better.

- i read that benq use the material where viewing angle limited, does that matter??
- samsung design seem woobly. i tried the P2250, looks fragile.
-i just need a quality built lcd, nice colour and contrast since i wanna watch movies and Photoshop. dont mind the hdmi thingy i guess

the pricelist is here.
not many model available here.
so limited choice
http://www.globespec.co.nz/category.php?cat=9#486

thank you very much

This post has been edited by fantagero: Sep 2 2009, 04:05 PM

@fantagero

- The viewing angle of all TN panels monitor was almost same, no matter on specification or you test it.
- For the product quality, Benq gave few bad impression, you can check this out on previous pages.
- Dead pixel, Samsung will only accept if your monitor has six or mor dead pixels.

Please state your budget, it is convenience that we can recommend you a best monitor for you.

thanks.
owh most lcd use the same material ey


my budget around $350 referring to the web pricelist since i'm not in malaysia.
plus the market here doest offer wide range of lcd.

http://www.globespec.co.nz/category.php?cat=9#486
http://www.pricespy.co.nz/cat_5.html
http://www.dragonpc.co.nz/c.aspx?r=40058.8...r+%2f+LCD&gst=i

thank you very much.

Now a day, Samsung produce very good quality panel with 0 dead/stuck pixel. But be safe than sorry, check on spot for dead/stuck pixel before paying the money.

Dell has the 0 pixel defect criteria/clause for exchange as well...

This post has been edited by BeastX: Sep 2 2009, 06:19 PM

but i reckon this only for latest lcd rite?

what does it mean ey??

thanks

guys,i would like some recommendation on 18.5 inch lcd for my brother since he only has hd4670 and play games a lot

currently i'm looking at
lg w1953t
aoc f19

any others suggestions?

thanks

..samsung always impress me with the design n quality. i got two samsung lcds n so far no complain. my 15" 152x still working perfectly even already 6 years old.

Maybe a new policy (for their ultra lines)... read on their online site.... LCD panels are guranteed to have no pixel defects, and replacement for those that do.

some question..

deall will exchange 1 to 1 if d lcd had dead pixel

then how about samsung n AOC??

they do provide 1 to 1 exchange when d LCD had dead pixel??

of course is within warranty period*