huh =.="

i bought 3 of them, for RM85 =.=" the one on the middle is the lower amp, if not mistaken 0.24amp, while the other 2 is 0.52amp if not mistaken @@

now that u say that, i jz checked thru google for the logo, and yeah, its the same as the fans im having... so memang its sanyo denki hahaha... means i bought it cheap?

This post has been edited by iBenQ: Mar 3 2009, 03:27 PM

Still stick with stock cooler better,
WC aint cheap...
TRUE need lapping job, after lapped,
it is monster


LoL, aint that expensive for TRUE fan clip,
I am using 2 unit of AC Ryan fan to pull-push,
3.4Ghz of Q6600 run max 55C in air con room...

http://forum.lowyat.net/index.php?showtopic=681324&hl=

pcmoddingmy is selling TRUE fan clip,
RM17 each only...
I think he still have stock for it...

Actually industrial grade fans are not that expensive except if u buy brand new ones.
Most of these fans are stripped off servers.
I got some of mu high powered fans for prices of less than RM30 per piece, and from my understanding, that is considered expensive as well.

Btw, forget the CM 90cfm, tats a lousy fan.

Too bad the TRUE i'm using is only a temp solution.
I borrowed the TRUE from sonicscourge, i dun have a cooler now after selling the IFX off.
Thats y was thinking whether to get a TRUE or setup something based on a D-tek Fuzion 2,

Agree with the 90cfm CM fan,
the LED is so lousy, burn after sometime,
fan is cool though when it is new...
maybe good choice if u choosing the 90cfm black colour no LED one...

Regarding the water cooling,
uhm, the cost are high,
a good set will cost you RM800 like tat...

1st time installation are big headache...
time consuming and leakage problems...
but after that, for maintainence wise,
not tat much dust will accumulate,
just watch out the coolant lvl only...

on the other hand,
air cooling is just plug and play like USB

Good price
But then again i gotten some panaflo low speed for below RM20

if the cfm is good, i wan it ... otherwise, peh~

if my pc is silent, i wont feel the "oomph"... must have some noise 1 ... too bad the shop dats selling the sanyo denki run out of stock, only left those tri-blade delta fans
to fill up my pc with those fans, its gonna cost me the equivalent of 1 1/5 sunbeam ccf T_T

lol.. for me silent is everything...

oh ya, my current setup running with fans with 7v or 5v mode only with those crappy CM 90cfm fan... mayb tis the main fact it perform slightly better than the true, mayb it will better with larger radiator or higher speed fan...

so @meno, try WC la... LOL... poison~

Same,non silent system sound cool
My front fan is High Speed Yate Loon at full speed(Turbulence make it sound really loud),Top fan is 8CM Sunon low amp but seem like noisy
Radiator fan is 2xhigh speed yate loon + one mid speed yate loon inside radbox,and exhaust fan is stock lian li blue led 1500rpm
Silent freak will complain

after oc, hard to silent anymore lo.... liquid cooler or nitrogen spray can ah...? hehhe..

that much of fan will keep me awake all night long

i'm revert back to semi silent setup.

using sunbeam fan controller to slow down my fan speed.



This post has been edited by overclockalbert: Mar 5 2009, 05:26 AM

anyone got spare powder supply to borrow /rent?
FMA go RMA

Buy Darnell's Noistaker 600w...
Then when FMA come back, sell it off...

Btw, still thinkin of WC, let me see how 1st...
Maintaining hobbies is costly, need to split between my Camera and PC now...
Lichyetan, any nice stuff for WC to recommend? Cheap and nice stuff.
I was earlier thinking of a budget of RM500 only for everything, but after considering getting a Fuzion V2, seems like 500 will not be enough...

Btw, nobody go support our fellow POC member here ar?
http://forum.lowyat.net/topic/954348

Errr adrian,it might be possible but take used parts
Heater Core
Nirox P2800 Moded
Generic Tubing
T Line + Fillport
Distill water + Bryan biocide
Custom shroud
High CFM fan
And used block
Still over RM500 lar

Adrian,

Cost breakdown of lowest cost, high-performance water cooling

Old heatercore/radiator from car/bike -RM100
Nirox P2800 modded -RM40
Generic tubing -RM4
T-line -RM20
Battery water (equivalent to distilled water) -RM4
High CFM fan -RM40 each
Fuzion 2 block -RM320 (new)

Total: RM528 with 1 fan and brand new block

What you lose by skimping
-Old radiator is probably dirty, rusty and lacks proper hose connections. You'll need to flush, de-rust and mod the thing before you can use it. Plus side is you'll probably get a better rad for a fraction of the price, though it'll take up more space.
-No reservoir, bleeding air with a t-line isn't as easy as it sounds. Expect to spend half hour or more each time you need to do it.
-No fungicide or anti corrosion additives. You'll have to change water more often, though by comparision to other downsides this is pretty minor. Corrosion is more of a headache though, you'll have to double check that all the parts touching the water are either non-metal or copper (since fuzion's base is copper). Then again, anti-corrosion additives or not, mixing metals in a WC loop is just a really bad idea.
-High CFM fan means lotsa noise. And you'll need it to be high CFM cos most car/bike rads are pretty restrictive. Alternative is more fans in parallel and/or push-pull, then you can turn down the speed, but means more money in fans.


Plus side is you have a full WC set running, upgrading is fairly straightforward after that. And every upgrade adds a lot of bang for your buck, carrying forward from system to system is also a lot easier than with aircooling. Btw my WC setup is up and running on my AM2, getting a C2Q running hopefully by next week.

Just use bryan biocide,it work

Happy Birdday for little kid Brian (OC4/3)

any1 noe wats the current price for rampage extreme? and where do i get it??

Thanks thanks ace mei mei

as OC4/3 and lohwenli mentioned, either premade kits or custom kit...

my recommendation go for:
D-Tek Fuzion v2,
Swiftech MCR-220QP,
Swiftech Micro Reservoir,
Swiftech MCP-655B.

not sure the pricing though, and da kit is same as mine... i also forgot how much i bought d, radiator bought years back, same as reservoir.

but the time i get should be cheaper cause now price will be higher due to economy problem...

Ur wc kit cost almost RM1k
I will go for the same setup as urs except for Swiftech APOGEE GTZ, Res Rev2 and pump w/ speed ctroller
At the same time gonna mod my freezone too.