owh..dat 1 not dust ke? i tot its dust..hope its really bubble haha..
diz things can peel off? i tot once u peel off then need to buy new 1 haha..
but if already dry also can peel off again? ya i still got some shield spray left..
but didnt dare to peel it again..scare it will be more worst

hey hey..u can use celotape..to tape all the dust..the apply it back on.....

---

Added on February 12, 2009, 8:35 pmbtw..what IS u guy bought?..where ek?..im trying to get this one..izit the same?

http://forum.lowyat.net/index.php?showtopi...hl=tan+alliance


This post has been edited by erinonlyone: Feb 12 2009, 08:35 PM

IS only got one version la..all same for that particular device..haha
i bought from tanalliance as he is the sole official reseller for malaysia..easy for warranty claiming..
@refugeez86
if dry d dun peel off.if still got a bit wet..let say 15min after applying still can peel...too long then don't la..fyi,i peeled n reapply for a few times...hehe
to avoid bubbles,i heard spray more and then use ur finger to make it even...then less bubble will appear.

guy, need help on below question!!

i got some question regarding rom upgrade.
currently my rom is i900DXHJ1 and i planing to upgrade to DXIA1 from lucifer web.
1. is that rom for malaysia set?
2. that is leak rom. so i see lucifer stated need to install samsung modem first before upgrade do i require that?
3. once upgrade the rom, i install program will be deleted..how bout the program i install in "my storage"
4. is there anyway to prevent it previious install program lost after upgrading rom?

hehe its too late already la..my IS already almost dry now..
nvm la..d important things is my omnia no scratch at all

yup i bought from him..
but need to wait for bundle..so try ask him when the next bundle open for reservation..

---

Added on February 12, 2009, 9:53 pmi already spray more on IS but toss a bit dat water cuz scare will go inside my omnia hehe..
i already tried to cucuk dat IS juz like in advert..so amazing it cant tear haha..
after stretch so long it can go back juz like before..

This post has been edited by refugeez86: Feb 12 2009, 09:53 PM

who ask about sdhc? omnia is microsdhc. same technology different size.

wahhhh put ur is on already.. i'll do it once i'm done with my assignmentsssss.

too lazy right now to do anything else.

btw i also change the userbar for signature at first post feel free to use.. hehe i took the one from refugeez86 signature

ya i asked juz now about dat sdhc..so it mean omnia does support micro sdhc la..
think want upgarde to micro sdhc but scare not support..
which storage is good to keep file (mp3,video,etc..) is dat in card or hdd?
want keep a lot file in hdd but scare it will lagg..

be careful during apply it..need a lot of patient..

its not from me actually..i also copy from lhongwuh hehe
thanx to him for funky omnia siggy..

from what i heard from card better. faster than internal. thanks lhongwuh..

takkan just one sig. must be more out there?

guys...jus to inform..below service center close dy..

Samsung Mobile Plaza (FMG)
Lot 01-46, Berjaya Times Square,
No.1, Jalan Imbi,
55100 Kuala Lumpur.
Tel: 03-2144 7878 / 03-2148 9687
Fax: 03-2145 7879

Guys, one noob question
If we're applying IS, do we need to remove the current screen protector (if there is one)?

thanx 4 ur info..then u already send ur omnia to service center?
what they said?

@karlbum
my pleasure..that siggy i got it tru googling..hehe
@Cyphereza
I remove mine before applying,as i was afraid that there will be dust on it..
fyi,if u always use transcriber,IS is a bit difficult to glide on it..so it's not that transcriber-friendly.i saw ppl pt one more layer screen protector on IS...
@erinonlyone
have u tried hard-reseting as i mentioned before this??

i removed it juz now during applying IS..
scare it will affect screen sensitivity..
but still keep my screen protector la..

IS screen sensitivity still ok so far...at least to me it is...
especially after some registry tweak..

This post has been edited by lhongwuh: Feb 12 2009, 11:11 PM

Ohh, okay. Thanks for the info

p/s: Still 50-50 to update to custom rom (maybe taril's), can i just flash it since i have DXIA2 already?

send dy..waiting for their calll tomorrow around luncho timiey..hope good news...they said prolly cause of software didnt update..(i dun understand actually..she said need 2 hours..but the service center close at 7..so i reach there about 6 ++.)..so no choice..left it there..and they said my power button stuck..dunno how come..i use very carefully....so saddy..

---

Added on February 12, 2009, 11:32 pmhi there..yes..hard reset dy..omniey asked to "tap the screen...."..but i tapped with my finger ,hand,,stylus..not working..not taking any input from the tapped ..so sad..

This post has been edited by erinonlyone: Feb 12 2009, 11:32 PM

i already on my omnia juz now..so far its ok wif touch screen..
do u apply IS on camera too? i need to remove it back cuz it affect wif flash..
the lens also become not clear..

@erinonlyone
so sorry to hear that..i use to have problem too..
stuck at startup screen...canot enter windows..so i hard reset...then ok d
@refugeez86
i applied whole body including camera lens..
nite time omnia camera memang not that good..flash oso...
i'm not sure wether is it because of IS...
tmr i try take photo outdoor...i suppose will be better...

the flash will reflect to IS then reflect back to lens..
so in pict will get all white hehe..
now already ok la cuz remove it already..

hurmm spend so much money on my omnia..
omnia is my baby..
omnia is my friend..
omnia is my gf..
omnia is my everythin...
hahaha..im crazy bout omnia..
omnia addict...

eh, got IS for the camera lens?..i thought it's a cut out to exclude the camera lens... ..or is there a new version of IS?

Cheers