the best monitoring hardware is probably HWmonitor.. but u have to pay T_T

Eh..sorry i dont know about this..
do we need to watch other temps too??
does NB means Northbridge??
can tell me what this parts do..
TQ

u can google for *ahem *ahem*

take ur manual book,there's a block diagram explaining the roles of each part on the mobo

guys, now im using q9550 + ep43-ds3l + ccf @3.4ghz.. i wanna know if it worth the upgrade to buy ep45 ud3r + megahalem to try and hit 4 ghz.. im gaming on 1920x1080 reso with gtx 285.. i got extra cash at the moment so thinking of changing the mobo..

of course you can, but im the kind who donates/buy to get stuff j/k.

to the guy above.. im not sure bout 4ghz with that proc ( ive never got one in my hand ).. but that mobo upgrade is definitely worth it.. megahalems rocks t0o..

my setup currently

e4600+ 2 CM 90CFM push/Pull ( stock @ 2.4 oced to 3ghz load temp 55-58, idle temp 34-36, voltage 1.38750..

This post has been edited by lightonokira: Jun 4 2009, 06:45 PM

if u really wanna hit 4.0Ghz i guess u hav no choice but to change mobo if 3.4Ghz is the limit with yr current mobo..

if u r letting go the CCF, pls giv me a price.. thx..

yea.this mobo works even more like a charm in ocing quadies

motherboard/system temp ~ <45C (the lowest one can go to 38C )

---

Added on June 4, 2009, 10:07 pmuish.. my reading is 80C.. dare to touch NB.. i dare not...

---

Added on June 4, 2009, 10:11 pmi thought... CCF performance become better if we go more higher clock...
if u read the review.. CF performance just decent only for non OC cpu...
but show the potential when OC (during load)...

This post has been edited by wch5274: Jun 4 2009, 10:11 PM

CCF cant fit UD3P,UD3R unfortunately

lucky im UD3...
but installing it quite risk (for AMD)...
afraid breaking my mobo...

lowest i can go is 33°C

CCF can fit UD3L rite? i read it somewhere..

anyway, CCF 92mm oso cnanot fit?

yea can fit UD3L i think.since UD3L dunhav those huge mobo heatsinks

not sure bout ccf 92mm eh

But CCF 92mm performance not so good...
better take bigger one


I just google and found out that GA-MA770-UD3 NB temp = 80C..
And max temp = 120C
lol.....

Look at my NB temp ... 81C... ????

How do i oc my Q9650 to run stable @4.00ghz with Corsair XMS2 800mhz 5-5-5-18 ram? any voltage example setting?? anyone??

ur ram try to hit 450 cl5

vdimm mayb around 2.0v

vcore 1.35 kua...

vnb set to 1.2v

i havent play such high end quaddie b4..sorry..this is only my guess for the vcore

Bump for this mobo.. coz i'm using this series also.. Hahh

come..post some results lar..owning dis board no oc result, no use buying this board..lol

How to get my fsb:dram ratio 1:1? I already set the Mch Freq. Latch to 200. Using Corsair DHX C5 2x2GB DDR2 800, dividers 3.33. The multipliers keep changing from 6.0 n 12.5. Is there something wrong with my setting?

I'm using E5200 on UD3R. Air cooled by OCZ V2.

Thanks in advance

This post has been edited by jackdante22: Jul 1 2009, 05:53 AM

Disable your EIST & C1E for the multiplier.
For 1:1, need to see your bios setting.

-pWs-

It can, if you orient it upwards. I haven't tried yet but it looks like you can also fit it vertically by removing the NB heatsink first and installing the NB heatsink again after mounting the CCF.

BTW, how effective is the NB heatsink at cooling? It gets almost as hot as my Tracers when running my CPU higher than 3.6GHz.

This post has been edited by yimingwuzere: Jul 1 2009, 01:53 PM