how is the CM Hyper 212 compared to Xigmatek S1283?

done some googling and found a list of coolers suitable for the EP45-UD3P/R
http://forums.anandtech.com/messageview.as...hreadid=2252023

CoolerMaster V8
CoolerMaster Hyper 212
CoolerMaster Z600
Thermalright TRUE
OCZ Vendetta 2
Thermaltake MaxOrb
ZEROTherm ZEN
ZEROTherm Nirvana
Xigmatek 1284


btw i'm still having the blue screen issue with my DES
http://forum.lowyat.net/index.php?showtopic=885018&hl=

This post has been edited by ZeneticX: Dec 28 2008, 06:41 PM

i've done some googling bout the s1283,seems like a really good cooler.but will the plastic push in pins support the whole thg well?

This post has been edited by ZeneticX: Dec 28 2008, 07:56 PM

but if use SS kit means need to remove the whole mobo? if tht so thn it would be way too troublesome

refer to the above list i posted

remove 1 time already considered troublesome for me .but i guess it will pay off eventually

and regarding the adhesive tape,i've heard tht it will be troublesome removing the plate if u plan to use it on other mobo or send ur mobo for rma,so the best way is to not use it.does it work tht way?

hey u are using the same casing and mobo as me .a ques here to make sure,when u 1st insert your mobo in,are the holes around the proc (for the cooler) aligned properly with the 1 on the casing plate?because i cant seem to push all 4 pins in securely.i afraid the holes at the bottom are causing the prob,but on the other hand some ppl say it might require many force to do so

which guide u follow on overclocking the rams bro?would like to overclock my ram as well,using the same corsair rams with cooling unit

s1283 or 1284

anyone know how to set memory speed to 1066mhz?i know its under DRAM setting but confused with all of them so need your confirmation

er,which is the specific path in bios should i edit?

thanks for the guide

i guess they use...digital cams?

hi all.got ques regarding overclocking and downclocking my ram

im currently using stock e8400 as shown on my sig.the cpu host frequency setting in my MIT is 333mhz x 9 (3.0Ghz).and my system memory multiplier is set to auto (1066mhz).

now i would like to downclock my ram to lets say 1000mhz (to solve a problem with my graphic driver after gpu oc),but theres only 4 multipliers option available for me - 2.0b,2.4b,3.2b,4.0b.setting it to 2.4 will put it at 800mhz which is too low imo ,setting it to 3.2 means no diff.so now what im gonna do to archieve around 1000mhz but not below 900mhz?and what timing should i set?

regarding overclocking is wheter i can straightly set the multiplier to 4.0 to overclock my ram?

huh?underclock to 3.744? my proc is just 3.0ghz stock

so i will take the option of 500mhz*6 as suggested by you.i should set higher volt or lower volt?and what timings u recommend for 1000mhz ddr2?currently im at 5-5-5-15

lol.im more like downclocking the ram now rather than overclocking .i'm still a noob when comes to overclocking,only know the basics bout it.won't overclock my proc till i get my new cooler hopefully after cny.cl4 is 4-4-4-10 as shown in ur sig?ram temperatures i guess no need to worry too much as i have a cooling unit over it.so cl4 is better option?

i only know how to adjust the vcore accordingly.not sure bout others.is + 0.5v for each of them enough?

This post has been edited by ZeneticX: Jan 21 2009, 10:21 PM

yeap i learn the basics from there.but just glance through like that because tldr



so this are the settings i need to set?

This post has been edited by ZeneticX: Jan 21 2009, 10:31 PM

thans a lot.will try 2moro

u nid to hav a good speaker system to experience tht,and install dolby control centre frm the cd with ur mobo

This post has been edited by ZeneticX: Feb 5 2009, 06:06 PM

anybody using this board with E8400 E0 oced to 4.0ghz abv?pls share ur bios settings with me.thks

and can any1 explain the settings in the advance clock controls?the higher the better?

This post has been edited by ZeneticX: Feb 18 2009, 05:20 PM

so whats ur settings?can share pls?

This post has been edited by ZeneticX: Feb 18 2009, 06:36 PM

alright.cause i currently only modify the vcore,wanna mod the others for better stability