lol i was jk only
but if you really dont mind maintaining the list, then go ahead

jangan sedih dengan komuniti

anyhoo, wheres muchi nowadays? seems a bit quiet

i miss playing online with you guys...need to get back soon...

lol..you in australia now?

i was...came back here for a vacation.

i tell you man...JB HiFi like porn shop for gamers...videogames as far as the eye can see...and preorder goodies...i have the RE5 statuette.

ah...crap...i envy you man
to have that kind of shop in here....urm.. i think another 20 year maybe

http://www.tgdaily.com/content/view/42644/135/

i wonder if ps3 can support this in the future or not. the spec is hardware-dependent or just software-based?

Can.
But it's hardware based, there will be a new revision of PS3s that will have HDMI 1.4.

HDMI 1.4 will be available for download at hdmi.org no later than June 30, 2009.

Connectors

There are four HDMI connector types with Type A and Type B defined since the HDMI 1.0 specification, Type C defined since the HDMI 1.3 specification, and Type D in the 1.4 specification.

Type A
    Has 19 pins with bandwidth to support all SDTV, EDTV, and HDTV modes.[2] The plug's outside dimensions are 13.9 mm wide by 4.45 mm high.[49] Type A is electrically compatible with single link DVI-D.[50]

Type B
    This connector has 29 pins (21.2 mm by 4.45 mm) and can carry double the video bandwidth of Type A for use with very high-resolution future displays such as WQUXGA (3840×2400).[51][50] Type B is electrically compatible with dual link DVI-D but has not yet been used in any products.[50][52]

Type C
    A mini-connector is intended for portable devices.[53] It is smaller than the Type A connector (10.42 mm by 2.42 mm) but has the same 19 pin configuration.[54][53] The number of pins is the same but the signal assignment is different because of the different shielding requirements due to the signals being in a single row. The differences are that all positive signals of the differential pairs are swapped with their corresponding shield, DDC/CEC Ground is assigned to pin 13 instead of 17, CEC is assigned to pin 14 instead of 13, and the reserved pin is assigned to pin 17 instead of 14.[55] The Type C mini-connector can be connected to a Type A connector using a Type A-to-Type C connector cable.[53]

Type D
    Introduced in the HDMI 1.4 specification,[56] it keeps the standard nineteen pins of Types A and C, but shrinks the connecter size to something that resembles a micro USB connector.[57] The Type D is 2.8 mm high by 6.4 mm wide, whereas the Type C is 3.2 x 11.2mm; for comparison a micro USB connector is 2.94 mm x 7.8 mm.


http://en.wikipedia.org/wiki/Hdmi#Connectors