Pwnagetool 2.2 update to 2.2.1. Download link available on first post or head to Devteam blog.

Cheers

Read the first thread. You'll find your answers. Look for this: "Locked iPhone 3G - Preserve Baseband"

Use Pwnagetool. Used it awhile ago. 10-15 minutes and all running good.

Can't work? Did you restart your phone after JB? I use Pwnagetool 2.2.1 and did it in one go. Cydia works as how it was before accept for some apps that needs updating like WifiToggle etc.

This post has been edited by davidgary73: Nov 24 2008, 02:08 PM

@unasville

Cheers mate. All the best. Do feedback when you're done.

Btw, will be updating first post with Issues on Firmware 2.2 with everyones comments on their current glitches and problems. Thanks guys.

You DFU own your own rite? That's why Error 1600. Pwnagetool got DFU helper as don't need to DFU on your own.

From iPhone For Dummies - 2. 2G/3G Unlocking and Jailbreaking - Firmware 2.2

e) Always select "No" when you're ask if your phone has been 'pwn before' in the process of customizing your firmware.
f) Do not proceed to DFU on your own since PwnageTool and Quickpwn has DFU helper as this will help to avoid errors e.g. error 1600.

Anyway, good that your all good and running.

This post has been edited by davidgary73: Nov 24 2008, 03:31 PM

@beavis68

Boss, u did not read the first post of this thread.

Please Read Before you Proceed!!!!!
From DevTeam
GOLDEN RULE: If you have a 3G iPhone and want potential soft unlock in the near future do NOT use QuickPwn, and do not use the official ipsw or the iTunes update process without using PwnageTool.
Please read all parts of this post before downloading and using these tools.
The ‘late 2008’ MacBook/air/pro line of computers have an issue with DFU mode. While it’s possible to go from Pwned 2.1 -> Pwned 2.2 (using PwnageTool), you can’t yet go from stock to pwned. If in any doubt use a different machine.

Use another older model mac to do as suggested by DevTeam.

This post has been edited by davidgary73: Nov 24 2008, 04:01 PM

I'm using NZ unit too and on iTunes 8.0 (did not upgrade). I would suggest to use iClarified tutorials if you're gonna JB.

@wilsoncvt

Hahaha..am always hiding..

@SixCylinder

Yes..follow the guide posted on first post.

@derrickflc

I'm afraid you can't. You still need to update Fw 2.2 via iTunes and Quickpwn to JB. Only Pwnagetool does it one shot.

@TeK_KeN

Tutorial on how to mass add +6 prefix for contacts.

http://forum.lowyat.net/topic/790913/+700#entry21660737 (by rushmode)

@wilsoncvt

LOLz..I made a link on iphone for dummies too under 5. CallerID - Numbers instead of names when receiving call or sms.

So it's easy to provide the link.

This post has been edited by davidgary73: Nov 24 2008, 08:42 PM

Read the link below:

http://forum.lowyat.net/topic/830708 (Refer to No:2 and also No:15)

Should be the same. Have a look into those directories path as suggested.

This post has been edited by davidgary73: Nov 26 2008, 12:37 PM

@cscheat

Check here.
http://forum.lowyat.net/topic/790913/+860 No:14

and No: 15 for manual backup of Contacts, note, maps etc

This post has been edited by davidgary73: Nov 27 2008, 11:45 AM

@cscheat

Not all operators works the same way as baretta mentioned.

I don't need the CallerID Fix since the first day i got my 3G iPhone because i'm on Maxis and prefix works flawlessly. No harm done adding those prefix.

So why not have them and rushmode has already gave a tutorial to mass add the prefix.

This post has been edited by davidgary73: Nov 27 2008, 11:55 AM

@baretta

Hahahha..a usb hub for new macbooks is the fix. Not bad. Picture on first post.

@vivaldi

Please refer here for some tips on how to conserve your batt usage.

http://forum.lowyat.net/topic/830708 No:3 and No: 22

@psychopersonified

Well done and